Dmac0312 Posted June 29, 2013 Share Posted June 29, 2013 Replaced my worn out serpintine belt with a new one, the new one has been squeaking like crazy even though i sprayed it down with belt dressing, ive tried about everything and I'm starting to think it may be a problem with one of my pulleys, where should i begin my diagnosis? Link to comment Share on other sites More sharing options...
ComancheKid45 Posted June 29, 2013 Share Posted June 29, 2013 Well to start off, purchase another new belt, belt dressings do nothing but gum up the channels and grooves and deteriorate the belt at a higher rate... Easyest place to start is to remove the sepentine belt and spin all the pulleys by hand and see what ya find out there ;) Link to comment Share on other sites More sharing options...
87MJTIM Posted June 29, 2013 Share Posted June 29, 2013 Harmonic balancer??? Replaced and fixed the squeek. Link to comment Share on other sites More sharing options...
TheDirtyJeep401 Posted June 29, 2013 Share Posted June 29, 2013 Definatly the belt dressing. i got a new one and cleaned off the pulleys with engine deegreaser. Also make sure the belt is tight too. than can cause squeaks too Link to comment Share on other sites More sharing options...
1989 Eliminator Posted July 2, 2013 Share Posted July 2, 2013 The pulleys themselves could have some rubber residue on them. Scrap ot off or lightly sand it off but be careful not to put deep scraps in the pulley. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now