STERLING STINGER Posted October 30, 2012 Share Posted October 30, 2012 hey guys... just wondering if anyone has ever lightened up a snow plow blade before. i installed the plow that was on my 88 on my 92 i just think the blade is too heavy for the plowing i actually do. and it tore up the 88....bushings, etc.... the blade is ready for a facelift thanks guys!! Link to comment Share on other sites More sharing options...
Exgrayxj Posted October 31, 2012 Share Posted October 31, 2012 I don't plow much snow anymore, but when I lived in Vermont most of the plow guys were beefing up the plow blades, especially when Dodge started using the Meyers. Fishers were heavier, and stood the commercial plow usage better. Leaving the blade on for normal driving is hard on any truck, and especially on coil sprung rigs. Fords with coils took a hard beating. A plow on a xj or mj will beat the hell out of everything. Your blade already needs some welding. In my area of Vt many of the guys with Meyers added reinforcement and another pair of trip springs. Most took the shoes off after the ground froze. Of course that is even harder on the blade. For your own use only, some welding, and take it off when not needed it will probably be ok. I never did think it was a good idea to hang 4-500 lbs five feet in front of the frame on a unibody. Link to comment Share on other sites More sharing options...
juan Posted November 1, 2012 Share Posted November 1, 2012 I have been runing a snoway snow plow in my 88 mj for about 5 years with no issues. I only do my driveway an my neightbors. The snoway plow is a clear lexan blade with down pressure - it works pretty good and the whole thing weight 380 lb. Link to comment Share on other sites More sharing options...
alleydog Posted November 1, 2012 Share Posted November 1, 2012 I bought a rusty old Meyer from a guy at work last year, He had found a plastic faced blade for his truck. Probably only saved 20 pounds tho. Link to comment Share on other sites More sharing options...
Automan2164 Posted November 1, 2012 Share Posted November 1, 2012 Only way to correct that problem is to make the truck better with it. Get high quality bushings and ends, and rebuild the whole front end. Rob Link to comment Share on other sites More sharing options...
STERLING STINGER Posted November 1, 2012 Author Share Posted November 1, 2012 I got that done already Rob. Thanks for the input guys. I bought the "airlift" for it. I have not put them in yet though. I guess there is no way to lighten it up. Ill keep u all posted. Link to comment Share on other sites More sharing options...
STERLING STINGER Posted November 1, 2012 Author Share Posted November 1, 2012 I got that done already Rob. Thanks for the input guys. I bought the "airlift" for it. I have not put them in yet though. I guess there is no way to lighten it up. Ill keep u all posted. Link to comment Share on other sites More sharing options...
Automan2164 Posted November 2, 2012 Share Posted November 2, 2012 You have the Meyer plow too, which is the factory approved plow, and IIRC, just happens to match the plow rating number exactly in the owners manual. Pound for pound. Rob Link to comment Share on other sites More sharing options...
STERLING STINGER Posted November 2, 2012 Author Share Posted November 2, 2012 I figured something was up when everything bolted right in. I didn't have to drill one hole!! Link to comment Share on other sites More sharing options...
JeepcoMJ Posted November 2, 2012 Share Posted November 2, 2012 You could buy a 6' meyer poly blade for around 900 new, but thats about it....and it's only a few lbs difference. Air shocks all the way Link to comment Share on other sites More sharing options...
STERLING STINGER Posted November 2, 2012 Author Share Posted November 2, 2012 YA ILL PROB INSTALL AIR SHOCKS AS WELL AS THE AIR LIFT SYSTEM....JUST TO BE SAFE Link to comment Share on other sites More sharing options...
juan Posted November 3, 2012 Share Posted November 3, 2012 The overall weight including the subframe of the snoway way plow I have in the MJ is about 340 to 350 pounds. The weight is enough to bring the front end down a bit but I fix that by installing a set of air lift bags in the front coils - they work great and they are very affordable. I will suggest that if you have the funds go for the matching compressor that automatically will keep the air bags inflated to the minimum pressure recomended plus you can always inflate and deflate from the comfort of the cab on those cold days. Link to comment Share on other sites More sharing options...
STERLING STINGER Posted November 8, 2012 Author Share Posted November 8, 2012 airlift bags installed. Easy installtion and they work great with the reccomended 50 psi in them with the plow on there is no sag at all and the ride is no diffrent. plow blade welded and painted up....ready to go. Thanks for the help guys!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now