kawaboy13 Posted July 1, 2012 Share Posted July 1, 2012 I was driving home today when my clutch pedal went almost all the way to the floor...Again. The same thing happened around a year ago and I replaced my master cylinder and my high pressure line from the master to the slave. I bled out my slave cylinder and still no luck. Is there something else I should look for this time? With the clutch an inch from the floor it has already disengaged :dunno: Link to comment Share on other sites More sharing options...
kawaboy13 Posted July 3, 2012 Author Share Posted July 3, 2012 Ordered another master? Anything else guys? :dunno: Link to comment Share on other sites More sharing options...
35 Dollars Posted July 3, 2012 Share Posted July 3, 2012 Typical Chrysler clutch master cylinder... I went through 5 of them in six years on my Wrangler. Link to comment Share on other sites More sharing options...
COMJNUT Posted July 4, 2012 Share Posted July 4, 2012 take a look at the clutch pedal assembly see if it has not broken. Link to comment Share on other sites More sharing options...
kawaboy13 Posted July 8, 2012 Author Share Posted July 8, 2012 Ending up being the clutch master cylinder :roll: Hope this one is better quality. :thumbsup: Link to comment Share on other sites More sharing options...
carnuck Posted July 19, 2012 Share Posted July 19, 2012 If the pedal arm is slightly bent it will push the master in at an angle that wears them out in a hurry (also makes it hard to bleed!) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now