Jump to content

89Patches 2000 Build...


Recommended Posts

Hello :wavey: , I've been on this forum for sometime now just watching the build threads and deciding what to do with my MJ, I always liked the 97+ swap but I thought it would be to much for me to do, but one night I somehow came home with a 2000 cherokee for $800 and next thing you know my Comanche is stripped :wrench: , Being that I am only 16 and work nights after school and most weekends I've manged to come pretty far with the conversion but for now ill just start you off with some pictures when I first got it , oh ya its an 89 4x4 lwb pioneer with 450,000k.

 

Here's when I first got her.

Image Not Found

Image Not Found

Image Not Found

The Rust

Image Not Found

My Moabs I picked up for $350

Image Not Found

My Donor

Image Not Found

 

I hope I uploaded these correctly :cheers:

Link to comment
Share on other sites

I agree. The swap is worth it. I fell in love with her all over again after I did it. Looks like you've got a great platform to build on. If you run into any brick walls with it, just ask. Plenty of us have done it now. And welcome!

Link to comment
Share on other sites

I live in southern Ontario, Canada where they layer the road with salt, but its funny I didn't think it was that bad compare to my other comanche's where I had 2 break in half :rotf: but thankfully I don't have to deal with the rust my brother is doing all body work and paint

 

Here are the new wheels on with my old power window doors

Image Not Found

My new dana 30 LP (for now)

Image Not Found

All cleaned up and new brakes

Image Not Found

and my donor is stripped

Image Not Found

Link to comment
Share on other sites

thats nothing compared to some of the ontario cars.

after 2-3 years a new car's frame has to be either rebuilt or repaired,

keep up the work!

its going to look bad @$$ when its done,

 

if you do drive it in the winter.

lots of car washes!

Link to comment
Share on other sites

Well i have seemed to have lost my pictures while i was doing the interior, so ill just show it 90% complete.

but first a flex shot, lol :D and some other randoms I found

Image Not Found

what it would look like slammed with lots of camber :rotfl2:

Image Not Found

So this is my dad's Dakota beside my MJ (which is 0" of lift and has broken front coils and it sits the same height) 8)

Image Not Found

Now here is when I took the drivetrain out

Image Not Found

Got the engine bay cleaned and painted and wiring and what not installed

Image Not Found

It took me probably 4 hours of beating bending to get the engine to go in, it just didn't want to go in but it finally did(also with newer front end)

Image Not Found

got all my interior pieces painted, it was only about a shade or to off, but you only notice if you use flash with a camera

Image Not Found

I got most of the interior done but have a few more things to do but all the wiring is done and it surprisingly works ;)

 

so this is about where I am with the build to date, now I am just waiting for my lift kit to come in then I get my front axle swap underway.

this is my first time doing axle swap so any advice would be greatly appreciated, Thanks :cheers:

Link to comment
Share on other sites

  • 2 weeks later...

So I have an update on the truck , I took the bed off today which was a pita because only 5 off the bolts would come out and the others were just rotted and stripped but my homemade hole saw solved that problem :idea: after I got it off I cleaned all the dirt and sand off and pushed it back in the garage to start cleaning up the frame

 

Image Not Found

Image Not Found

Image Not Found

Now the bed is just sitting on the trailer ready to go and get body work done

Image Not Found

I cannot wait till I start driving it again comanche.gif seems like its been in the garage being worked on more then I actually drove it,lol :wall:

Link to comment
Share on other sites

  • 2 weeks later...

Have another update on my build, so today I went to the junk yard and got my fuel tank which is a 22 gallon dakota fuel tank and right beside it was a 99 fuel tank with the pump, so I got the 22 gallon and 99 fuel pump for a $15 :D , also when I was there I found a Explorer with a 8.8 disc brakes, 4.10s and it was Lsd and I can probably get it for $50

Image Not Found

maybe sometime this week I can get it running :jump:

Link to comment
Share on other sites

So I got my 8.8 the other day :D , it turns out it wasn't 4.10's the tag was rusty and was hard to read, it turns out it was 3.55's so now ill leave my front axle alone, and re gear later down the road but the best part was that I picked the 8.8 up for a whopping $35 :jump: and I also got my gas tank wired so now i am just waiting to get gas to fire her up :banana: and maybe put my front drive shaft in and take it for a spin comanche.gif

 

Image Not Found

Link to comment
Share on other sites

  • 3 weeks later...

I have an update!!!! So this weekend I was able to get my front end swapped (sorta) I just have to get a new nut for the drag link and it should all be done, And its a 3" lift just to get me started and on the road and I also finally got my headliner installed, I now just need to get black sun visors then the interior should be complete. My brother said if it moves under its own power he'll take it for paint, so there maybe paint in the near future, so any paint suggestions would be great!!! Thanks...

 

It's a hover Manche. :brows:

Image Not Found

 

Image Not Found

 

To show you haw rusty my old axle was

Image Not Found

 

Image Not Found

 

Image Not Found

 

And of course a shot of the headliner

Image Not Found

 

So that's my up date, So PLEASE give me paint suggestions my brother keeps saying black, he paints everything black :fool:

Link to comment
Share on other sites

So Yesterday I finished my axle swap and put in my front drive shaft and DROVE It up the driveway!!!! comanche.gif

 

Here are some pic's, Plus a Flex shot 8)

 

Image Not Found

Image Not Found

Image Not Found

 

I was surprised how much lift it gave me it was more like 3.5"

Link to comment
Share on other sites

BLACK is bad, nice build to date jamminz.gif

 

Thanks... I can't wait to see more of you're RHD MJ, and what do you think of dark blue?

 

I car,nt wait to get home to see more of my MJ. Hopefully my body man has kicked a few goals.

As for colour you go with what ya hart tells ya :thumbsup:

 

I,m leaning towards BLACK so i have the mathing pair

But plumb crazey purple is looking good

Link to comment
Share on other sites

Every time I see someone ask about paint, I always suggest Inca Gold because if I built another, that's what I'd chose. Congrats on the progress!

 

Thanks!! Between Inca Gold and Baltic Blue not sure which one I like better :hmm: There just give such a different look between the 2

 

BLACK is bad, nice build to date jamminz.gif

 

Thanks... I can't wait to see more of you're RHD MJ, and what do you think of dark blue?

 

I car,nt wait to get home to see more of my MJ. Hopefully my body man has kicked a few goals.

As for colour you go with what ya hart tells ya :thumbsup:

 

I,m leaning towards BLACK so i have the mathing pair

But plumb crazey purple is looking good

 

I was already thinking plum crazy for my next manche project :thumbsup:

Link to comment
Share on other sites

Great work!

I know the feeling I got when I could drive my truck after I built it,

Keep it up,

 

Got any pics of the other manche's??

 

I can't seem to find 2 manche's in my pictures, they were just rust buckets, lol

but here is my brothers Lt1

 

Image Not Found

Image Not Found

and the next one to be scraped

Image Not Found

and the lowered 87

Image Not Found

 

Sorry for the large pic's photobucket change the size when I try

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...