Jump to content

Cargo Light setup


Recommended Posts

Anybody have a wiring diagram of how the factory cargo light setup is wired through the truck? I would appreciate it. And, if anyone can provide a picture of what the factory light looks like, I would very much appreciate it. :bowdown:

 

Reason for that is because I figure if I get my friend's 93 Laredo XJ, I'll be doing an entire interior / partly exterior swap with my truck. It'll get me back on the road faster towards my ultimate goal of complete restoration and personalization. :thumbsup: Besides, there's LOTS of times where I wish I had that damn cargo light handy... :fs1: :(

 

-------

EDIT:

Also, If I can't find a factory cargo light setup, is there any sort of aftermarket setup that anyone recommends in particular? I'm always open to whatever suggestions you guys have. :cheers:

Link to comment
Share on other sites

I don't have a scanner or I would send you the FSM diagram. The cargo light has a single

pink wire, 16 or 18 GA, that runs from the light to the LH pillar harness then down to floor

then forward and up to the dash switch. Here's what the light looks like:

Link to comment
Share on other sites

I don't have a scanner or I would send you the FSM diagram. The cargo light has a single

pink wire, 16 or 18 GA, that runs from the light to the LH pillar harness then down to floor

then forward and up to the dash switch. Here's what the light looks like:

Thanks for the picture. :cheers:

 

 

I have that FSM, and searched through it a while, but never stumbled across the Cargo light setup. :doh: Hope it'll help others at least. As for me, back to searching through pages and pages I s'pose. :cheers:

Link to comment
Share on other sites

I have that FSM, and searched through it a while, but never stumbled across the Cargo light setup. :doh: Hope it'll help others at least. As for me, back to searching through pages and pages I s'pose. :cheers:

isn't it on page 63 and 92?

Link to comment
Share on other sites

My MJ does not have a cargo light or switch but the wiring is in the B pillar and behind the dash.

 

I wired in a third brake light on the cab. This gives me the idea to use a combo brake light/cargo light from a later model Ranger or Toy from the JY.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...