veritas4156 Posted April 19, 2011 Share Posted April 19, 2011 So I went to completely redo my exhaust back from the manifold today and everything went great except the last part. The rear hanger on the bed side for the tailpipe is missing. I bypassed this by using one of those cheap universal hangers from Advance Auto but I figured I'd see if someone can shoot a pic for me so I can rig up a more permanent fix. Mine's a long bed, not sure if that makes a difference. Both MJs I've had were missing this. I dunno if it isn't supposed to have one or if their prone to breaking or what. Link to comment Share on other sites More sharing options...
Paul Bruchal Posted April 19, 2011 Share Posted April 19, 2011 Id think if you brought your MJ to a exhaust shop, they would have a rubber bushing and a hanger...Or go to a junk yard with a MJ and take that one off and have it welded on yours... On mine I cut the tailpipe were it comes down from going over the rear axle so it points at the ground with a cheap 3.5" tip. Also I think if I were in deep water, water couldnt go up into the exhaust pipe. Link to comment Share on other sites More sharing options...
jeep10 Posted April 19, 2011 Share Posted April 19, 2011 So I went to completely redo my exhaust back from the manifold today and everything went great except the last part. The rear hanger on the bed side for the tailpipe is missing. I bypassed this by using one of those cheap universal hangers from Advance Auto but I figured I'd see if someone can shoot a pic for me so I can rig up a more permanent fix. Mine's a long bed, not sure if that makes a difference. Both MJs I've had were missing this. I dunno if it isn't supposed to have one or if their prone to breaking or what. This is a SWB Link to comment Share on other sites More sharing options...
Harley Posted April 20, 2011 Share Posted April 20, 2011 I got a LWB, if your still in need email me at harley79@live.com and I will take any pics ya need tomorrow when its light out and send em directly to ya. Link to comment Share on other sites More sharing options...
87Warrior Posted April 20, 2011 Share Posted April 20, 2011 It looks like the SWB is the same or similar to the LWB. I don't know if I have a picture or not, but I know the hanger bolts to the inside of the rear frame rail (might be cross member on the long bed, its been a few months since I removed it). There should be two small holes in the frame with nuts welded on the backside. IIRC a 10mm took the bolts out... Or snapped them. Link to comment Share on other sites More sharing options...
veritas4156 Posted April 22, 2011 Author Share Posted April 22, 2011 Thanks for the responses guys. I figured it would be something like in the pic. Sorry for the slow response, I've been working ridiculous hours lately. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now