nameless Posted October 16, 2010 Share Posted October 16, 2010 i got 6.5" RockKrawler longarms up front, SOA Rear & 37" BFG A/T's which are on it now front don't look to bad, how have people attacked the rear? has anyone attempted anytihng like this on the bed of there MJ? i'm not sure if it will even be enough http://www.naxja.org/forum/showthread.php?t=29750 we did it on my buddy's XJ and it turned out really nice Link to comment Share on other sites More sharing options...
Motion Offroad Posted October 16, 2010 Share Posted October 16, 2010 Here is our MJ with 6.5" lift trimmed with TJ flares. Shown with a 35" tire in this picture but we have fit 37's without issues. Link to comment Share on other sites More sharing options...
86FUBAR Posted October 17, 2010 Share Posted October 17, 2010 This is what i did to my manch , the back lower portion was already trimmed , and i did this trim job caus of the 35's that i installed the holes showen are located directly above the factory holes for the flare retainer brackets , i drilled those to keep the inner fender well atached to the outer fender i later installed pop rivets in the holes Link to comment Share on other sites More sharing options...
Philistine Posted October 17, 2010 Share Posted October 17, 2010 Here is our MJ with 6.5" lift trimmed with TJ flares. Shown with a 35" tire in this picture but we have fit 37's without issues. That's what I want to do to my Comanche! Is there a write up out there for this? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now