Jump to content

Recommended Posts

Posted

My brake lights quit working so I tried replacing the stop lamp switch. That did not help. What else could be the problem? No power going to light no matter if the switch is in or out. Thanks for any help in advance.

Posted

Check the pedal there is a switch at the top of it that controls the lights mine did it if its messed up just put new connectors on it.

 

Cole

Posted

MJs have a connector in the wire harness just behind the driver's side rear tire. It is notorious for corroding inside and may need to be cleaned or replaced. I had to replace mine in the 88 and found a generic connector at the parts store.

Posted

also make sure no rodents have climbed up and chewed on the wiring going to the lights, i had that problem with a dakota i had! no only did the dam thing chew through the brake wiring in back but also chewed through some in the engine compartment for the ignition! :mad:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...