Cheap(ish) wheel choices.......

[sinkrun]

I have some outlwas ran about 6 mounth never in salt, wheel weights on back side I am going to be selling problem is the have alot of back space so with 30`s they stick out about 2 inches past the flare.

[jpnjim]

Good choice on the Ravine wheels. Me likee. :cheers: To dress up the two front center hubs, you can pick up a pair of these:

 

http://www.amazon.com/Mr-Gasket-2485-Chrome-Dust/dp/B000CMD5BM

 

Dresses it up well.

 

:thumbsup: Thanks Hornbrod, that would help allot. :yes:

 

Have you tried these before, is that the right size (1.790" Diameter)?

 

They also make a 2.180" set (PN 2486).

 

(I do have a tape measure if you're not sure ;) )

:cheers:

[jpnjim]

I have some outlwas ran about 6 mounth never in salt, wheel weights on back side I am going to be selling problem is the have alot of back space so with 30`s they stick out about 2 inches past the flare.

 

I thought about Outlaws,

You could even stretch things, and say they're 'borderline correct' for MJ's,

since YJ Renagades used them while MJ's were still being built,

(= they're a legit factory part that you probably could've gotten 'dealer installed' on a new MJ if you new the right strings to pull),

 

 

Tho I'm set with these Ravine's now :thumbsup:

[HOrnbrod]

The 1.790" diameter is close to correct for the 2WD dust caps. I have them on my rig. They are little loose w/o a shim; I simply cut out a 1/4" strip of aluminum from a beer can, formed it around the edge of the cap, then tapped them in. :cheers:

 

 

If you need a better pic let me know. :cheers:

[jpnjim]

The 1.790" diameter is close to correct for the 2WD dust caps. I have them on my rig. They are little loose w/o a shim; I simply cut out a 1/4" strip of aluminum from a beer can, formed it around the edge of the cap, then tapped them in. :cheers:

 

 

If you need a better pic let me know. :cheers:

 

That'll do :D :yes:

 

I'm going to order a set right now :cheers:

 

 

Thanks for the pic. :thumbsup:

& They look awesome wrapped in BFG MT's!

 

Ravine's are on their way to bumping the 5.9 Silverstars off as my: "favorite XJ/MJ wheel of all time"

[WahooSteeler]

Man, she cleaned up nice. Or should I say "he" since the truck's name is Granpa LOL! Looks great with the Ravines, but like Don I'm biased. :brows:

[jpnjim]

On Page 1 of this thread I linked a page that had knock off (copies) of Rubi wheels.

 

Well, it looks like they've knocked the Ravine wheels too. :cheers:

 

 

They're available in Silver, Black-ish grey/silver (Hyperblack), fully Black centers, and (I'm thinking specifically for hornbrod) CHROME. :clapping:

 

Starting at around $470 shipped

http://cgi.ebay.com/ebaymotors/Set-4-15 ... ccessories

http://cgi.ebay.com/ebaymotors/Set-4-15 ... ccessories

http://cgi.ebay.com/ebaymotors/Set-4-15 ... ccessories

 

 

 

http://cgi.ebay.com/ebaymotors/Set-4-15 ... ccessories

 

and the bling:

[WahooSteeler]

yeah, those have been on there for awhile. i think the hyperblack's are smokin!

[HOrnbrod]

 

 

:drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool:

[jpnjim]

 

 

:drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool:

 

 

:clapping:

 

You're the first person I thought of :thumbsup:

[HOrnbrod]

You're the first person I thought of :thumbsup:

 

I've loved chrome for a long time Jim. Here's a pic from ten years ago. :D

 

[88pioneer]

The black with the chrome lip and the gray ones are pretty dang sweet lookin :yes: