woody62 Posted January 26, 2010 Posted January 26, 2010 i was just wondering how to get the slide part on driveshaft off any pointers? :help:
jimoshel Posted January 26, 2010 Posted January 26, 2010 If you mean seperate the drive shaft from the sliding yoke, just yank real hard.
woody62 Posted January 26, 2010 Author Posted January 26, 2010 the greaser was all beat up and broken so i was swapping it out with a different one i had laying around
woody62 Posted January 26, 2010 Author Posted January 26, 2010 another quick question.... so to put it back on to i just push really hard? bc the rubber seal gets in the way
JeepcoMJ Posted January 26, 2010 Posted January 26, 2010 the greaser was all beat up and broken so i was swapping it out with a different one i had laying around ... why don't you just rebuild the double cardan of the shaft with the good greaser?
woody62 Posted January 26, 2010 Author Posted January 26, 2010 bc that side is all bent which is why i got the shaft from u in the first place
JeepcoMJ Posted January 26, 2010 Posted January 26, 2010 bc that side is all bent which is why i got the shaft from u in the first place oh. sorry, I didn't know that the grease zerk area is missing. I've been looking at them, it looks like you unthread that collar then pull the slip off.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now