JeepinSoldier Posted November 4, 2009 Posted November 4, 2009 So I'm driving to work at 5:30 in the morning and suddenly the instrument lights on the dash quit working. The little light that lights the transfer case position is also not working. Look behind the truck and the tail lights are also not working. In front marker lights are not working. Brake lights and turn signals OK. Checked the fuzes and they are blown. Replace the #10 Tail/marker light fuze, turn on the lights and get the tail lights back. Replace the #5 instrument light fuze and it immediately blows. Any ideas what might be blowing the fuzes?
Jakeman17 Posted November 4, 2009 Posted November 4, 2009 Mine did this also but happened before i bought it. I have no tail lights and no dash lights but indicators lights works
Jakeman17 Posted November 4, 2009 Posted November 4, 2009 My headlight switch was rewired and we ar ethinking that is the cause. So i am waiting on a headlight switch with some pigtail to see if that is the problem
Oizarod115 Posted November 4, 2009 Posted November 4, 2009 have you checked the fuse box and the slot for the inst/tail fuse for corrosion? my dash lights checked out the other night and a slight wiggle of the fuse was enough to get everything back again.
mfpdm Posted November 4, 2009 Posted November 4, 2009 Since you have a manual tranny, look to see if the master cylinder is leaking down on the fuse panel. :cheers:
Darren Posted November 6, 2009 Posted November 6, 2009 Since you have a manual tranny, look to see if the master cylinder is leaking down on the fuse panel. :cheers: And if that's happening, oh dang. Golly-gee that can be such a pain to have to clean, or worse replace. Not a fun job.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now