aemsee Posted June 13, 2009 Share Posted June 13, 2009 This guy must be laughing out loud. This pan (not a pair) started out at an opening bid of 39.99 with a buy it now of 44.99. I put in a 39.99 bid a few days ago as first bidder. Someone immediately out bid me, so I bid it to what the buy it now price was. Now look at it. :eek: I sure hope it isn't someone on here :shake: . http://cgi.ebay.com/ebaymotors/ws/eBayI ... EBIDX%3AIT Link to comment Share on other sites More sharing options...
WahooSteeler Posted June 13, 2009 Share Posted June 13, 2009 I'm guessing they misread the ad and think it's the pair. The two other bidders have over 800 and 3300 feedbacks respectively. Probably as sellers, but experienced ebayers nonetheless. Which makes it all the more surprising if they misread the ad. Could always be in cahoots with the seller to drive up bids if they think they have a sucker on the line. Link to comment Share on other sites More sharing options...
aemsee Posted June 13, 2009 Author Share Posted June 13, 2009 I guess. But once this is ended, they will immediately put up another ad for MJ floor pans. Been a cycle for a while now. Link to comment Share on other sites More sharing options...
WahooSteeler Posted June 13, 2009 Share Posted June 13, 2009 I guess. But once this is ended, they will immediately put up another ad for MJ floor pans. Been a cycle for a while now. Yeah, I've seen them too. All the more confusing as to why the bidding is up. Oh well, it's not us paying for it! :thumbsup: Link to comment Share on other sites More sharing options...
Wildman Posted June 13, 2009 Share Posted June 13, 2009 At that price.......for only ONE floor pan....... :nuts: At also, reading the add........the floor pan is for XJ's, MJ's and Wagoners :hmm: Almost as costly as this place........http://www.rustrepair.com/BODY_PANELS/o ... HEROKEE.84 Why don't you check out what Continental has to offer........there up your way. Other wise..........I'll keep that piece of galvanized sheet metal handy for you :D Link to comment Share on other sites More sharing options...
WahooSteeler Posted June 13, 2009 Share Posted June 13, 2009 the ebay guy's prices are definitely good. i've heard good things about the one's from sherman's, a little work needed but a good fit from what I hear. https://ecat.shermanparts.com/base/sear ... +floor+pan Link to comment Share on other sites More sharing options...
jeep_freek88 Posted June 13, 2009 Share Posted June 13, 2009 :eek: :eek: :eek: :eek: Wow I would sooner go to a steel shop and fab one up :brows: Link to comment Share on other sites More sharing options...
HOrnbrod Posted June 14, 2009 Share Posted June 14, 2009 Interesting. I posted this up last month HERE and no one bid on them. Now buyers are going crazy bidding on them. :huh???: Link to comment Share on other sites More sharing options...
lostissues Posted June 14, 2009 Share Posted June 14, 2009 I got the floor pans from Sherman, not a perfect fit but you can pound them into submission. Link to comment Share on other sites More sharing options...
aemsee Posted June 14, 2009 Author Share Posted June 14, 2009 Found these listed as well: http://cgi.ebay.com/ebaymotors/84-01-JE ... ccessories I e mailed to see if they sell just one side at a time. They definitly look more like my floor contour than the other pans. Bit pricey though. Link to comment Share on other sites More sharing options...
Wildman Posted June 14, 2009 Share Posted June 14, 2009 Interesting. I posted this up last month HERE and no one bid on them. Now buyers are going crazy bidding on them. :huh???: Don, Us Northern people have to wait until all the snow melted before we even think about doing body work, ya know :roll: Found these listed as well: http://cgi.ebay.com/ebaymotors/84-01-JE ... ccessories I e mailed to see if they sell just one side at a time. They definitly look more like my floor contour than the other pans. Bit pricey though. Now those floor pans look much better that the other ones, yes, little more pricer, but "ya get what ya pay" Plus, being die stamped and 19 ga just would work out better in the long run........Yes, I seen the rocker they had, might be the way to go in my case :hmm: The thing I don't like about the e-bay floor pans, in some cases, the pan don't cover enough of the tranny tunnel, one I did, I needed to come up the tunnel about 4 inches, and the 'pre-made' don't extent that far up. Link to comment Share on other sites More sharing options...
aemsee Posted June 14, 2009 Author Share Posted June 14, 2009 I agree, it is definitly a case by case situation. For mine, the metal challenged part is mostly on the bottom. Link to comment Share on other sites More sharing options...
Wildman Posted June 15, 2009 Share Posted June 15, 2009 I agree, it is definitly a case by case situation. For mine, the metal challenged part is mostly on the bottom. Man.......I had to read that 3 times, I kept reading it as something else :hmm: (good thing you left the n out) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now