jeepaholic Posted February 26, 2009 Share Posted February 26, 2009 Ok..I give up what size is the allen head that removes the rear caliper?..Ohh and shouldnt i only have to remove these two and retainer spring to get the damn thing off.. Link to comment Share on other sites More sharing options...
mvusse Posted February 26, 2009 Share Posted February 26, 2009 Don't know, but I believe the MJ front calipers are 7mm, which is not a common size. Most (if not all) sets jump from 6 to 8. It is also somewhere between 1/4 and 5/16. Link to comment Share on other sites More sharing options...
jeepaholic Posted February 26, 2009 Author Share Posted February 26, 2009 7mm is my guess...what a pain in the @$$.. Link to comment Share on other sites More sharing options...
BLHTAZ Posted February 26, 2009 Share Posted February 26, 2009 Are you sure that it is a hex head?? The info I am getting is saying that it should be a T45 torx... :hmm: Link to comment Share on other sites More sharing options...
jeepaholic Posted February 27, 2009 Author Share Posted February 27, 2009 def not a torx... Link to comment Share on other sites More sharing options...
Comanche County Posted March 1, 2009 Share Posted March 1, 2009 Use a Flat head screwdriver that's just a little too large to fit in the Allen bolt,,,,then hammer it in with a BFH,,,,then tighten away.... :D Dang I'm a redneck.... :brows: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now