oldrusty Posted January 28, 2009 Share Posted January 28, 2009 The windshield washers on the wifes 2000 cherokee havent worked in a couple months so I finally got around to looking at it last weekend. It appears the pump itself has decided to retire on me. My question is where is this dad burned thing located at? I'm thinking ita probably in the bottom of the resevoir but thought Id do some research before I start pulling the fender to get at it. Thanks Link to comment Share on other sites More sharing options...
JeepcoMJ Posted January 28, 2009 Share Posted January 28, 2009 it's under the reservoir in the fenderwell. there are actually two of them. to get it, just pull back the front of the inner splash shield inside the fenderwell...the front part just drops down, making it plenty easy to get done without taking the whole fender or flare off. Link to comment Share on other sites More sharing options...
oldrusty Posted January 28, 2009 Author Share Posted January 28, 2009 thanks....I'll check that out tomorrow evening :clapping: Link to comment Share on other sites More sharing options...
HOrnbrod Posted January 28, 2009 Share Posted January 28, 2009 Here's a pic: And here's the best (cheapest) place to get them: Rock Auto, ANCO Part # 6723 You'll have to drop the reservoir to pull out the pump as there is no room to pull it out. It's a push-in fit. Link to comment Share on other sites More sharing options...
Sir Sam Posted January 28, 2009 Share Posted January 28, 2009 do either of the pumps work? there are two, one for the front and one for the rear. Link to comment Share on other sites More sharing options...
jtdesigns Posted January 28, 2009 Share Posted January 28, 2009 It has two hooks on top,, either A you have to push it to the front or, b to the rear so itll come off.. I'd just take the fender off.. its to easy to do... Link to comment Share on other sites More sharing options...
HOrnbrod Posted January 28, 2009 Share Posted January 28, 2009 Sam, I think it clearly shows there are two pumps as above. But I guess you were asking about the common fuse?? JT, it pushes to the rear after you loosen the two mounting screws. Link to comment Share on other sites More sharing options...
Sir Sam Posted January 28, 2009 Share Posted January 28, 2009 Sam, I think it clearly shows there are two pumps as above. But I guess you were asking about the common fuse?? JT, it pushes to the rear after you loosen the two mounting screws. Yes, pushes to the rear. I know it has two pumps(windshield/rear window), I am asking if either of them work for two reasons: 1: it may not be the pump that is the problem. 2: if the pump is the problem an easy way to get working front washers would be to switch the hoses around Link to comment Share on other sites More sharing options...
jtdesigns Posted January 28, 2009 Share Posted January 28, 2009 Don,, what do you have the rear pump going too?? Headlights like a benz??? I mean you are the "benz" guy right??? Link to comment Share on other sites More sharing options...
HOrnbrod Posted January 28, 2009 Share Posted January 28, 2009 The second pump is a spare. I ran wiring and fluid hose from both and capped one off under the hood. So when one burns up I can just switch over w/o pulling the fender liner out. And actually some export XJs had the leveling headlights, but they run with vacuum motors - like my old Benzs did. :D Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now