4.6L Stroker engine for sale w. nice accessories in NC

[HOrnbrod]

Saw this on the strokers forum. Looks like a sweet deal to me. JT, can you check it out? I think it's in Raleigh.

 

I am selling my dream of having the baddest XJ EVER... but alas hard

times have come and my loss is your gain. I bought it running and

assembled and heard it run before I bought it, but never got to "ride"

it because it came out of a badly rolled CJ. I disassembled it to "see

what I had" -- and I was not dissappointed... and neither will you...

 

94 block -- decked .010 and bored .060

Speed Pro H825CP Pistons 15cc dish

94 head casting # 7120 new valves, 3 angle valve job, new springs

CompCams #68-231-4 206/214 degree cam

Clifford Header

2000 Intake for an extra 15 ponies

MSD-6AL Off Road Ignition Box

 

Just throw in a set of injectors and maybe a map adjuster and vroom

vroom!!!

 

You CANNOT piece all of this together for DOUBLE the cost!!!!!!!!!

This engine was in a CJ that was running a Howell EFI-- from the looks

of the tops of the pistons he was running a little rich--- better than

lean any day!!! There was no ring wear or cam wear anywear so I

believe the 5000 mile estimate on milage was accurate... this is a GOOD

motor!

 

I'm asking $1200, payment by cash, paypal or certified check...

 

I will deliver for a cost negotiated after the sale... hell I'll even

help you put it in if your close enough... I wanted to see how this

sucker pulls anyway.... woo hooo!!!....

 

PICS HERE:

 

email tragiccomic1972@yahoo.com or call 919-616-9934

 

If it hasn't sold by the end of the weekend I'll list it on e-bay.

 

Jason

[ejndssn]

my only question is the 3 & 4 cyl walls looks discolored :hmm: like rust of some sort

[HOrnbrod]

Yeah, looks like a little rain water got in there 'cause it's been opened up for awhile, but just surface rust. Valves and piston tops look good. Wish I were close enough to go eyeball this. Dayem, the headers, 99 intake, MSD ignition, and build specs look super.

[ejndssn]

if it wasn't for my messed up schedule right i would liked to take a trip and see it for myself and from the pictures it appears to have the light weight crankshaft. it would be worth a look see and may work a deal :brows:

[HOrnbrod]

Yeah, you're only about three hours away. This is definitely worth a look see. I'd head on up there if my stroker was AFU. But fortunately it's not. :cheers:

[jtdesigns]

Sorry Don I'm on the blue ridge side.. I'm about 4 hours east of Raleigh. My cuz lives there, but she won't have the slightest clue on what to look for.. Sounds like a good engine, but 1200 seem high??? IDK....

[HOrnbrod]

For a built stroker with those accessories? That's cheap as dirt IF everything he says is true, with the build sheet parts all new. And that's his asking price - got a feeling you can get it much cheaper. It will go for that at least on Ebay.

 

DISCLAIMER: I don't know this guy or anything about him, but he wasn't the engine builder. That's the guy I'd like to talk to. If everything he says is true, this is a good deal for a 4.6L if it was built right............

[ejndssn]

Yeah, you're only about three hours away. This is definitely worth a look see. I'd head on up there if my stroker was AFU. But fortunately it's not. :cheers:

x2 on that mine was from a kit AP b4 the stop work and no answer :hmm:

[HOrnbrod]

x2 on that mine was from a kit AP b4 the stop work and no answer :hmm:

 

Yeah, Accurate Power has been un-accurate now for quite awhile now. :cry:

[summerinmaine]

This is really unfair! Why are these ads never from SoCal?

 

If they were, I'd be on this like white on . . . well . . . white! :brows:

[ejndssn]

This is really unfair! Why are these ads never from SoCal?

 

If they were, I'd be on this like white on . . . well . . . white! :brows:

if ya had any relatives in the area they maybe able to help ya out or wait for it to go on sell on ebay :brows:

[summerinmaine]

This is really unfair! Why are these ads never from SoCal?

 

If they were, I'd be on this like white on . . . well . . . white! :brows:

if ya had any relatives in the area they maybe able to help ya out or wait for it to go on sell on ebay :brows:

 

No relatives, but the problem is, it would still involve shipping cost, and that seems to be another 30-40% on top of a fair price. :mad:

[HOrnbrod]

This is really unfair! Why are these ads never from SoCal?

 

If they were, I'd be on this like white on . . . well . . . white! :brows:

 

Dayem, I wish someone closeby could check this out. It's built. Jeff? I know you're in the midst of swapping to a 4.0, and I know you'd like a 4.6 a LOT better. :D

[mjeff87]

Rrrrraleigh/Durham :D is a dead-on 2 hour trip for me from where I'm at (I've done it 2X already). If anyone's REALLY interested in it I could be persuaded by copious amounts of Bud Light to pay it a personal visit and get a sitrep......

 

My stroker plans are about 1-2 yrs. down the line, but I'll have one, eventually Don :cheers:

 

Jeff

[summerinmaine]

Rrrrraleigh/Durham :D is a dead-on 2 hour trip for me from where I'm at (I've done it 2X already). If anyone's REALLY interested in it I could be persuaded by copious amounts of Bud Light to pay it a personal visit and get a sitrep......

 

I wouldn't want someone to go that far, but if there were someone in the near neighborhood, it'd be worth a whole pile of frosties to me to have this checked out, and see if a reasonable deal (including shipping) could be done.

 

In truth, SoCal is the pits when it comes to Jeep parts. Every yard around here seems to think they're made of unobtanium.