CoryMJ89

What's the difference between a lock rite and Aussie and a spartan?

Yeah I don't don't just bunch of mud holes but like technical stuff and hill climbs rocks etc but I do get a lot of snow soo.... Idk then

I'm looking into to buying a locker for my dana 30 was originally gunna do a selective locker like arb or e-locker but decided to go a different route and put money towards something else in the truck so now i need to buy a cheaper locker but.... Where? Kind? and price? preferably under 400

It's around 5000 give or take

Thanks for the help ill update in a couple days to see if anything has changed(:

I just bought a wix filter gunna change my oil tomorrow and see if anything changes also just a tune up on it too bc I'm puttin my MSD ignition in so new cap rotor plugs and wires

Oh the picture of the Comanche the first pic and the cage one looks exactly like a house near me

I know this house!! Ur right at the bottom of Blair road where it ties into river road my cherokee broke down before I got my manche and I pushed it into ur drive way for like a few hours... But I drive the red Comanche around town might have seen it?

I kinda like the look of the rustys bumper just don't wanna pay there price especially after shipping

The manifold itself did not fall off the down pipe connecting to the manifold fell off and no with the mystery oils cleaner oil pressure didn't go up it helped at first tick went away for a couple day and now is back there is a little exhaust leak bc I didn't put a new gasket and it's barely noticeable I'm using a fram oil filter and 10-40 oil 170,000 miles on the motor

One day my exhaust fell off from the manifold I bolted it right back up and I started having a tick sound. along with that once this sound started happening my oil pressure dropped and I the a couple rockers started making noise too.. I put some mystery engine/gas cleaner that's red in the motor to help with the noise see if it would clean anything up and it did for awhile then started up again but now a little louder than before. the noise only happens after a couple minutes after starting up my truck and then goes away after awhile. it also happens when I starting to crawl up something and the motor gets in really low rpms like when taking off... help please!!!

Wheres a good place to look at buying a tubed front stinger bumper? that's not crazy expensive?

okay I'm readin on the revolver shackle what does it mean unloading?? like droppin out?

the forklift won't show anything i have already seen ive already seen the spring completely drooped out and the shackle as far forward as it will move...

shocks arent limiting bc i don't have any on at the moment until i switch to my 8.8

no i don't have any photos as of now fancy shackle thingies?

So here's my problem my front flexs really well i can get the rear tire good amount over 40 inches off the ground but when the front goes up othe rear maxes out way before. i can maybe get my front up about 35 inches when the rear is fully dropped out. the rear is just soa with a longer shackle in the stock mount and a small block. now i did go out and buy spring hanger mounts to move the shackle forward to hopefully allow for more drop. any suggestions on what to do? and no shocks arent an issue

no its both sides driver and passenger side that hit and idk ill have to look there from trail gear.. and at rest?

how do you upload photos?

I'm runningg rustys 8.5-9 longarm with a 1 inch spacer with 14inch 5125 bilestiens as it drops out and the axle moves down my shock will end up hittin the unibody forcing the shock to bend

so when my front end drops out my shocks hit the unibody and start to bow the shock before it gets to its full drop out so i was wondering anyone done coilovers? where to get some? or how to fix this situation? thanks!

i have a rough country sye only cost about 180 190 everyone i know runs it no one has had a problem with it works perfect for me!

I've been thinking about doing duals but don't know a whole lot about them. what all does it take to complete dual cases? thanks!

what all do you need to dual cases?

okay thanks!