Aidan

It only seems to run hot when sitting in my driveway at idle, last thing I want is for it to blow up from overheating.

I was sitting in the manche with my son today (2 yrs old, loves to lay on the horn and yell "beep beep") and after about 20-25 min my temp gauge was reading 240-260. Should I be worried or is that normal for a renix? When I'm riding around it RARELY hits 210, I'm fairly certain it's the original radiator; 112k miles.

Would you mind posting a link for that bed cover? Love your build by the way

My main issue is gonna be the caulking, I can wiggle my window from inside the cab right now lol. When you re insert the window with the sealant, will it fit snugly without the gasket or will it be lose?

So pull it and clean it up then try to find a glass shop for re instillation? I know my rubber trim piece is shot but that's only for looks right?

Also any tips or recommendations from people who have done this job would be incredibly helpful

Hey guys, I know this has been asked a bunch of times but how the heck do you re seal the sliding rear window? I know there's a write up on here somewhere but I couldn't find it for the life of me. It's obviously been leaking a while because the PO caulked the hell out of it...

I was seriously considering that one, even though I feel like that's WAY too nice for my truck. I messaged the seller yesterday but haven't heard back yet. For once though the wifey is on board with me spending a few hundred on the old gal so I think it might be a sign 😂

Thanks guys, PM me or comment here with updates, I'll be itching for a console when I get my buckets in lol

I was doing some research and would love one just like this, but I would be happy with a 97+ one with brackets in honey after looking at some of em in MJs and XJs

Hey guys I didn't get notified you replied, I'm located in NY and would gladly pay for your time/shipping/console. I'm in no rush, I don't even have the buckets yet lol

Looking to purchase a pre 97 full center console, my interior is honey but I'm not super picky about the color, I can always dye it lol. I have no brackets so I need both. As far as i know it can be from an automatic (mine is manual), if you have one or know of a reasonably priced one please PM me or comment here. Thanks!

I suppose the hunt continues then, the seats I was going to buy were from an 86

That's why I asked lol, from the post (the first link) I thought you could put 2 door cherokee buckets onto the MJ bench seat bracket

Just so I'm 100000% sure before purchasing the seats, buckets from a 2 door cherokee will work when bolted to comanche seat brackets?

I'm looking to purchase a factory service manual and/or any other useful manuals and figured I'd ask here before spending my money elsewhere lol. (Not sure if my signature is visible from mobile, it's an 88) If anyone has a spare or can point me to the one I need it would be greatly appreciated! Sent from my moto e5 play using Tapatalk

Not sure if there's any difference in the years, I recently replaced all the vent hoses from the VC with Napa parts. PNS: 7151365 air intake vent hose 7151367 & 7151366 vacuum harness (both sides) Sent from my moto e5 play using Tapatalk

Make sure you can open the fill plug BEFORE you try the drain plug, if the fill plug is seized you can fill from the vent hole below the shifter (I think it's mentioned in the link) Sent from my moto e5 play using Tapatalk Drain plug location (rwd ba 10/5)

Thanks for the labeled chart Jeff, I should purchase the 93-98 Grand Cherokee parts instead of the Comanche ones? Sent from my moto e5 play using Tapatalk

I need some help getting steered into the right direction (pun intended lol). I went out and took some pictures and was hoping you guys could help me with part numbers. I always end up ordering the wrong stuff and with super long mailing times during corona I'd like to get it right the first time lol Sent from my moto e5 play using Tapatalk

Basically every ball joint in my front end is shot, on the ends of the track bar, sway bar etc are ripped at the boot and spewing grease. Is there a kit from Mopar or crown auto for a full set? I'd even go for some upgraded parts to beef it up if anyone has had luck with a particular brand, thanks in advance ! Sent from my moto e5 play using Tapatalk

I was looking at an old thread, do I have to use primer first for it take correctly? Sent from my moto e5 play using Tapatalk

Alright that scares the hell out of me [emoji23] what kind of glue would you guys recommend? I've never pulled a windshield or rear window so any tips are greatly appreciated Sent from my moto e5 play using Tapatalk

The previous owner decided to "fix" the leaky rear window like this and it doesn't bug me nearly as much when my cap is on. Are there any companies making new seals or am I better off trying to find one in a JY? Sent from my moto e5 play using Tapatalk

Mine is an 88RWD, mine has the same clip on the cluster side to squeeze. Ty for the replies everyone, I'll be (wallet permitting) ordering and replacing my shot Speedo cable soon! Sent from my moto e5 play using Tapatalk