Fuel sender pinout needed

[ghetdjc320]

Just like the title says, I need the fuel sender connector pinout. It's just 3 wires, power, ground, and level sender resistance. I can reference the sender or body side of the connector. Either an HO or Renix point would be fine.

[eaglescout526]

A. Black/Ground

B. Tan/Gauge

C. Orange/Power

Renix is E=0 and F=88-90

 

HO is E=105 and F=0

[ghetdjc320]

1 hour ago, eaglescout526 said:

A. Black/Ground

B. Tan/Gauge

C. Orange/Power

Renix is E=0 and F=88-90

 

HO is E=105 and F=0

Awesome, thanks. So center pin is always gauge it sounds like 

[eaglescout526]

No problem and I hope so for the HO but I can’t see Chrysler really changing that one around.