Bull Posted July 8, 2022 Share Posted July 8, 2022 Howdy, I am in need of a voltmeter for a 1987 Jeep Comanche. A nice working original or close to original voltmeter or working full gauge cluster would be GREAT! Anyone got one for sale? TY, BD Link to comment Share on other sites More sharing options...
eaglescout526 Posted July 9, 2022 Share Posted July 9, 2022 What’s wrong with the one you have? Is it reading low, reading inaccurately or not at all? Link to comment Share on other sites More sharing options...
Bull Posted July 9, 2022 Author Share Posted July 9, 2022 The meter was reading inaccurately and fluctuating all over from 8-12 volts while the charging system and battery checks out at a constant 13 volts charge and 14.5 under full load. As you can see by the picture the voltmeter is now not reading at all. Link to comment Share on other sites More sharing options...
eaglescout526 Posted July 9, 2022 Share Posted July 9, 2022 Have you done any of cruisers tips? Have you cleaned the contacts on the starter relay? Yeah these gauges aren’t the best in the world but I got mine to read damn near accurately by just cleaning every contact. And I do have the same cluster as you. Link to comment Share on other sites More sharing options...
Pete M Posted July 9, 2022 Share Posted July 9, 2022 have you checked the voltage at the cluster main connector? if that is good and there's no visible problems with the "circuit board" then I'd agree that it's the old gauge. Link to comment Share on other sites More sharing options...
Recommended Posts