reevesmanche87 Posted May 16, 2020 Share Posted May 16, 2020 just recently rebuilt the TBI on my 87 2.5l comanche and when I went to crank it, I wasnt getting any power. I know the battery is good because I took it from my daily and both terminals were properly tight. anyone know what my problem could be? Link to comment Share on other sites More sharing options...
eaglescout526 Posted May 16, 2020 Share Posted May 16, 2020 How does the starter relay look? It is by the battery and relay center. Link to comment Share on other sites More sharing options...
reevesmanche87 Posted May 16, 2020 Author Share Posted May 16, 2020 8 minutes ago, eaglescout526 said: How does the starter relay look? It is by the battery and relay center. I'm not sure. I don't think it's the relay because I'm not getting power anywhere in the jeep. should have made that a little more clear lol Link to comment Share on other sites More sharing options...
eaglescout526 Posted May 16, 2020 Share Posted May 16, 2020 A lot of the trucks power comes originates at the starter relay with the fusible links. Has the battery cables been replaced? Link to comment Share on other sites More sharing options...
reevesmanche87 Posted May 16, 2020 Author Share Posted May 16, 2020 16 hours ago, eaglescout526 said: A lot of the trucks power comes originates at the starter relay with the fusible links. Has the battery cables been replaced? not to my knowledge Link to comment Share on other sites More sharing options...
eaglescout526 Posted May 16, 2020 Share Posted May 16, 2020 I would do a voltage drop test. You said the battery is good and has 12v. I would test to see if the cable is sending 12V down the line to the starter relay. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now