70barracuda Posted March 5, 2020 Share Posted March 5, 2020 Like the title says, my turn signal stalk is super floppy/loose. It still works fine in all functions but I can pretty much make a circle without it grabbing any of the functions like high beams or turn signal. Is this because of the main switch inside the steering wheel? Also, if I do replace that what else should I do while I'm in there. Thanks. Link to comment Share on other sites More sharing options...
Jeep Driver Posted March 5, 2020 Share Posted March 5, 2020 Open it up and see if the screws are lose. Stalk is cheap but the switch is expensive. Link to comment Share on other sites More sharing options...
70barracuda Posted March 5, 2020 Author Share Posted March 5, 2020 I just ordered a new stalk because mine is all cracked and ugly. A new turn switch is only 30 bucks for an acdelco so i might just order it and since I'm going in there i might as well replace it. The wiper switch on the other hand is 150....so that will stay put. Link to comment Share on other sites More sharing options...
70barracuda Posted March 6, 2020 Author Share Posted March 6, 2020 Welp I decided that if I'm opening it up I'm replacing it all. 100 bucks for high beam switch, turn signal switch, new cam, stalk, tumbler, and ignition switch. Pretty much a freshening up minus wiper switch Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now