AMC86Kid Posted November 17, 2018 Share Posted November 17, 2018 Hi guys been a wile since i posted can anyone post a link on how to remove or pull the dash out i need to swap mine out with a different one thanks Link to comment Share on other sites More sharing options...
gogmorgo Posted November 17, 2018 Share Posted November 17, 2018 https://www.cherokeeforum.com/f51/dash-removal-35444/ I followed that one years ago. The only thing I would add is that you have to unbolt the parking brake release handle from the lower dash panel in step one. Link to comment Share on other sites More sharing options...
WyoCherokee Posted November 19, 2018 Share Posted November 19, 2018 be very careful with the heater control cable connection. it's plastic and can break very easily. Take out your instrument cluster and remove the speedo cable before you start yanking on it. the heater hoses are a royal pain to hook back up. Take your time, put screws in labeled plastic baggies. Took me a full day with breaks to remove, change heater core, and re-install dash. It helps to remove your seats and console. Link to comment Share on other sites More sharing options...
gogmorgo Posted November 20, 2018 Share Posted November 20, 2018 I pulled the dash to replace wires with the seats in place. They give you somewhere to sit to work, lol. If you've got a full console I can see that getting in the way, though. Link to comment Share on other sites More sharing options...
AMC86Kid Posted November 20, 2018 Author Share Posted November 20, 2018 thanks i will try my best sure looks like a lot of time oh well Link to comment Share on other sites More sharing options...
gogmorgo Posted November 21, 2018 Share Posted November 21, 2018 Yeah. It's a lot of little fiddly bits. Link to comment Share on other sites More sharing options...
AMC86Kid Posted December 1, 2018 Author Share Posted December 1, 2018 Well boys i got the dash out it wasn't too difficult and all i can see that i damaged was the plastic ties that hold the wires and a vent duck tube Link to comment Share on other sites More sharing options...
AMC86Kid Posted December 1, 2018 Author Share Posted December 1, 2018 the tube on the driver side was the one that i had a hard time removing Link to comment Share on other sites More sharing options...
AMC86Kid Posted December 1, 2018 Author Share Posted December 1, 2018 it was getting dark so i stopped but my other vent tube wasn't connected or at least i didn't notice where it was connected if you guys know where it goes let me know other wise i will snoop around when i go to clean it all out tomorrow Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now