kook911 Posted November 3, 2016 Share Posted November 3, 2016 To the guys that have one install what kind of screws did you use and what size? Did you put anything to prevent water getting into the hole? I just picked one up and want to make sure I do this right as I will be puttin holes into the sheet metal. Link to comment Share on other sites More sharing options...
HOrnbrod Posted November 3, 2016 Share Posted November 3, 2016 I used the same screws and washers used for the installation of metal roofs on houses, with an additional neoprene washer under the visor between the visor and cab roof. 3/8" x 3/4"L. Sealed top and bottom and they don't leak and never will. Like these but 3/4" long. Link to comment Share on other sites More sharing options...
MeanLemons Posted November 3, 2016 Share Posted November 3, 2016 There's LUND hardware for sale on eBay. About $10 Link to comment Share on other sites More sharing options...
mikekaz1 Posted November 3, 2016 Share Posted November 3, 2016 I used the same thing don used. I think mine were #12 and for reassurance I coated them with some RTV also Link to comment Share on other sites More sharing options...
kook911 Posted November 4, 2016 Author Share Posted November 4, 2016 Thanks guys for the info. Went to HD and picked up what I need. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now