krustyballer16 Posted August 21, 2016 Share Posted August 21, 2016 Has anybody built one of these before? Just a little 6.5hp (212cc) motor from harbor freight, axle and sprocket kit with a centrifugal clutch and some wheels on either a full custom frame or a bicycle frame cut up and put on a frame. Twist throttle set up with a simple front cantilever brake set up. If anybody else has built one, post em up! $500 or so. Link to comment Share on other sites More sharing options...
64 Cheyenne Posted August 21, 2016 Share Posted August 21, 2016 Last go kart thing I had, the first thing I did was straight piped it...next week park managers outlawed go carts and mini bikes...go figure. This is a cool Idea, wheels already turning... Link to comment Share on other sites More sharing options...
Pete M Posted August 23, 2016 Share Posted August 23, 2016 neat! Link to comment Share on other sites More sharing options...
krustyballer16 Posted August 26, 2016 Author Share Posted August 26, 2016 Posted on facebook I was looking for 20" bmx bikes, next day at work I had 4 of them! Picked a bike and started cutting. On this first one, we're going to used the main tube (bottom tube) and down to the part that the pedals went through. The top tube and upright support will probably be cut off. The pedal tube piece will be welded to a notched tube piece and that will be welded to the bottom frame for the motor and axle and seat. Tried to order axle, bearings, clutch,sprocket and wheels yesterday but that didn't go as planned. Maybe in a couple weeks when I get back from vacation. Link to comment Share on other sites More sharing options...
64 Cheyenne Posted August 27, 2016 Share Posted August 27, 2016 Posted on facebook I was looking for 20" bmx bikes, next day at work I had 4 of them! Picked a bike and started cutting. On this first one, we're going to used the main tube (bottom tube) and down to the part that the pedals went through. The top tube and upright support will probably be cut off. The pedal tube piece will be welded to a notched tube piece and that will be welded to the bottom frame for the motor and axle and seat. Tried to order axle, bearings, clutch,sprocket and wheels yesterday but that didn't go as planned. Maybe in a couple weeks when I get back from vacation. Got a link on where you were going to order kart parts? Link to comment Share on other sites More sharing options...
krustyballer16 Posted August 27, 2016 Author Share Posted August 27, 2016 Bmikarts.com Link to comment Share on other sites More sharing options...
krustyballer16 Posted August 28, 2016 Author Share Posted August 28, 2016 Link to comment Share on other sites More sharing options...
krustyballer16 Posted September 27, 2016 Author Share Posted September 27, 2016 Link to comment Share on other sites More sharing options...
krustyballer16 Posted September 27, 2016 Author Share Posted September 27, 2016 Does 27 mph right now. Still a lot of clean up to do. Gotta figure out a better twist throttle and cable. It's got a cheap twist on it now and the cable is spliced together to be long enough. Gotta put a rear brake on it. The front bicycle brake is useless. Link to comment Share on other sites More sharing options...
DTA Posted September 27, 2016 Share Posted September 27, 2016 Reminds me of this video i watched last year haha. The frame is a work of art https://www.youtube.com/watch?v=TPgVcpbUp3E Link to comment Share on other sites More sharing options...
krustyballer16 Posted September 27, 2016 Author Share Posted September 27, 2016 I'm getting ready to build one out of square tubing. Will look a lot better than this one in the rear. And might do the little holes and pipe in the neck like this one. Link to comment Share on other sites More sharing options...
krustyballer16 Posted October 10, 2016 Author Share Posted October 10, 2016 Well,...last night the drift trike earned it's new nickname..."mustang". It plowed thru s crowd of people and hit my new dodge... Bent the frame and front forks on the trike and smashed the twist throttle. Put a dent in my truck bumper Took out a girls ankles And sliced the rider's finger open. He had to get 4 stitches. Balls! Link to comment Share on other sites More sharing options...
jimoshel Posted October 10, 2016 Share Posted October 10, 2016 Asked the wife if I could borrow her bike. She said yes untilI showed her what i was going to do with it. She said sumthin like &*+@# . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now