Tank4L Posted June 24, 2007 Share Posted June 24, 2007 I see the drain plug and fill plug but the fill plug is out of reach for a bottle of lube and i don't have the right tool to get it off. any tips? Link to comment Share on other sites More sharing options...
offroader461 Posted June 24, 2007 Share Posted June 24, 2007 i fill mine through the shifter tower...i got quite fast at taking it all apart lol Link to comment Share on other sites More sharing options...
UNL1MTD Posted June 24, 2007 Share Posted June 24, 2007 if its a BA 10 the right tool is a square key. The correct size is 8mm. I used a piece of 5/16th stock and filled it down until it fit. Then I bent it in a 90 degree angle to make a key tool out of it. Works good. I filled mine using a suction gun. Link to comment Share on other sites More sharing options...
Oizarod115 Posted June 25, 2007 Share Posted June 25, 2007 BA10 i grinded down a 3/8th inch 3" ratchet extension to the right size, put it on a wrench works great. fill using a oil can from auto parts store just can, flexy metal tube with tip, and pump lever. cost me like 10 bucks i think Link to comment Share on other sites More sharing options...
ejndssn Posted June 25, 2007 Share Posted June 25, 2007 i did the same as offroader fill from the stop with the recommend amount +or- couple of oz. est. :brows: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now