Jump to content

88 pioneer 4.0L not starting help!


Recommended Posts

88 pioneer 4.0l 4x4

I searched and found the service manual for the fuel system but didn't help.

I finally got the sending unit working, tank installed, lines run, and pump wires connected (found a couple burn/cooked wires in the cab leading to the pump fuel). I get fuel up to the regulator but no further... The line is clear, fuel lows easily, and is pressurized. I assumed the FPR was stuck shut so I bought another one. Same result with new FPR. Outside of the vacuum line is there any other reason the why fuel would not pass through? Maybe issues with the vacuum ball? Any suggestions would be much appreciated.

Link to comment
Share on other sites

fuel filter is new, forgot to mention.

Should the fuel pressure test read 39 even if the fuel rail is dry as a bone?

I have the line plugged in the FPR and the FPR sitting on a rag so I can see if fuel is coming out of the FPR when I turn the motor over. Nothing comes out with or without the vac line plugged in.

Link to comment
Share on other sites

Kind of sounds like you are testing the return line and looking for fuel to come out of it. The fuel comes from the tank to the line at the rear of the engine,thru the fuel rail, then thru the regulator and then back to the tank. If the fuel rail is dry as a bone, then either your pump is not working, or you have a blockage some where. Can you hear the pump working?

Link to comment
Share on other sites

Ive had her in my possession for 5 months and today was the first time she fired up. Turns out there was a booger in the fuel rail plugging things up. Thanks cruiser for the help!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...