Jnick Posted December 23, 2015 Share Posted December 23, 2015 Hello. Can you please help me? I have stared at this issue for a while now. I also have searched CC as well as online videos. Due to a squeal, I replaced the fan belt and the idler pulley and the ac delete pulley. To do so, I pulled out the air filter box and unconnected all the vacuum lines. I did not label them and am having trouble figuring out which lines go together. I have looked at that one diagram that keeps on showing up but get confused because it does not show the paths in detail. Rather that one diagram only shows one line that comes out of the 'vacuum fitting' on the drivers side when in reality there three or four lines that are coming out of the 'vacuum fitting'. I am not certain where any of them fit into. It is a mess right now. Any help would be greatly appreciated. Thanks, Jimbo Link to comment Share on other sites More sharing options...
cruiser54 Posted December 23, 2015 Share Posted December 23, 2015 Here's all you need: http://cruiser54.com/?p=121 Link to comment Share on other sites More sharing options...
buckwheat Posted December 23, 2015 Share Posted December 23, 2015 nice website cruiser54. It will be nice to have everything together in one spot. Link to comment Share on other sites More sharing options...
Crash Posted December 24, 2015 Share Posted December 24, 2015 Definitely follow Cruiser's tips. And be thankful you are not working on a 70s-80s honda with all of the non-labeled, misguided vac lines!. Link to comment Share on other sites More sharing options...
Jnick Posted December 31, 2015 Author Share Posted December 31, 2015 Thanks very much cruiser54 and everyone else. It was helpful. Happy New Year! Jimbo Link to comment Share on other sites More sharing options...
Jnick Posted January 16, 2016 Author Share Posted January 16, 2016 Hello again!! So, now I do not have 4x4.... I do not have the part-time light (which was working before I played around with the above vacuum harness project) and I do not seem to have 4x4 High. I can tell that I do have 4x4 Low. Does anyone know if the above vacuum harness have anything to do with the 4x4 vacuums? I believe they are separate right? Any thoughts on what it could be? Thanks for your help AGAIN! Jimbo 1988 Jeep Comanche Pioneer 4X4 4.0 93,000 miles of awesome. Link to comment Share on other sites More sharing options...
indreland Posted January 16, 2016 Share Posted January 16, 2016 My 4x4 only works in high I have the same question as jnick above 1989 4.0 4x4 manual Link to comment Share on other sites More sharing options...
cruiser54 Posted January 17, 2016 Share Posted January 17, 2016 Ditch the vacuum stuff to the front axle. Here's how to rid yourself of that crap: http://comancheclub.com/topic/17377-cad-fix-1/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now