USAFAGumby Posted March 9, 2015 Share Posted March 9, 2015 SOLD 2 pre-97 Jeep Cherokee cloth bucket seats, not sure of the exact year. Both slide, tilt, and swing. They are very clean, one small tear in the vinyl of one seat and some rust on the brackets. Will deliver to csprings, boulder, or denver. Price is also negotiable. I remember a post where these sold for $200 but I'm willing to hear anyone on here out. http://cosprings.craigslist.org/pts/4923518907.html This is my first junk yard find and you could say I am addicted! The bench seat from the same cherokee was there when I left, as well as parts from 2 XJ Wagoneers so if anyone is looking for those trim pieces let me know! Link to comment Share on other sites More sharing options...
yellaheep Posted March 9, 2015 Share Posted March 9, 2015 Just to clarify........ These came from a 4dr XJ and do not flip forward as needed for an MJ........ correct? I'm not seeing the release levers on the upper shoulder of the seat....... Also, what condition were the front door, door panels and arm rests? Black door panels and arm rests in good shape are great snags for MJ's Did it have a small shifter console or the full center console in black? Grab that as well, especially if the console lid is good. The knee panel below the dash is another good piece to snag in black. So are the sun visors and plastic clips. Link to comment Share on other sites More sharing options...
USAFAGumby Posted March 9, 2015 Author Share Posted March 9, 2015 Correct. I didn't think about that.....oh well :doh: The black door panels both fronts and both rears were being used as mud mats for people to walk on unfortunately I think the console was the longer one and all the dash pieces were still good! Might go back this week and grab some more if I have time Link to comment Share on other sites More sharing options...
TheDude Posted March 10, 2015 Share Posted March 10, 2015 If you can bring them closer to Pittsburgh I'll buy them. Link to comment Share on other sites More sharing options...
USAFAGumby Posted March 10, 2015 Author Share Posted March 10, 2015 Sounds like a bit of a drive :laughin: Link to comment Share on other sites More sharing options...
shelbyluvv Posted March 10, 2015 Share Posted March 10, 2015 Strip the cloth and sale just the cloth. It is easier to find the seat than the black fabric and shipping is manageable also. Link to comment Share on other sites More sharing options...
yellaheep Posted March 10, 2015 Share Posted March 10, 2015 Strip the cloth and sale just the cloth. It is easier to find the seat than the black fabric and shipping is manageable also. I did this very same thing not too long ago. Worked out pretty well - but I sent the seat foam and head rests as well. Someone with MJ bucket frames can just cut the opening in the shoulder for the seat release lever. Link to comment Share on other sites More sharing options...
shelbyluvv Posted March 10, 2015 Share Posted March 10, 2015 I just bought a set of fabric and head rests as well. Shipping is much cheaper and easier for both parties. Link to comment Share on other sites More sharing options...
USAFAGumby Posted March 10, 2015 Author Share Posted March 10, 2015 Strip the cloth and sale just the cloth. It is easier to find the seat than the black fabric and shipping is manageable also. I did this very same thing not too long ago. Worked out pretty well - but I sent the seat foam and head rests as well. Someone with MJ bucket frames can just cut the opening in the shoulder for the seat release lever. Good advice! If anyone wants the fabric, headrests, and seat backs I sell them shipped for $100. I think shipping the foam would be a bit much. If you have the seat itself I would bet you have the foam too. Link to comment Share on other sites More sharing options...
TheDude Posted March 10, 2015 Share Posted March 10, 2015 Strip the cloth and sale just the cloth. It is easier to find the seat than the black fabric and shipping is manageable also. I did this very same thing not too long ago. Worked out pretty well - but I sent the seat foam and head rests as well. Someone with MJ bucket frames can just cut the opening in the shoulder for the seat release lever. Good advice! If anyone wants the fabric, headrests, and seat backs I sell them shipped for $100. I think shipping the foam would be a bit much. If you have the seat itself I would bet you have the foam too. Oh really? Link to comment Share on other sites More sharing options...
USAFAGumby Posted March 11, 2015 Author Share Posted March 11, 2015 Just sold the seats. I can still grab some trim parts if anyone is interested! Link to comment Share on other sites More sharing options...
yellaheep Posted March 11, 2015 Share Posted March 11, 2015 If you go yardin'...... keep an eye out for some tan buckets like those. Actually, front door panels, arm rests and center console as well. Just send pics and a heads up as to where they are. I don't expect you to pull and pay for all that. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.