Jump to content

Recommended Posts

Posted

On a '87 MJ with AW4 transmission there are two lines carrying trans fluid to the radiator. One line goes to the top left of the radiator and the other line goes to the bottom left of the radiator. The top line is attached with a flare nut. The bottom line has a quick disconnect fitting. You squeeze two ears together and the tube pops out. Mines leaking. I've been to Auto Zone, Advance Auto, NAPA and O'Reilly. They not only didn't have one, they didn't even know what I was talking about. Might have to go to the stealership manana and see what they can come up with. I can find no reference in the FSM, Chilton's or any other info on it.  Does anybody know what the official name, nomenclature is? Know where I can get one? :dunno:

Posted

Don, You didn't disappoint me. I had a hunch you would be first. Started to just PM ya and not bother with a post. :thumbsup:

Posted

Don, You didn't disappoint me. I had a hunch you would be first. Started to just PM ya and not bother with a post. :thumbsup:

 

It's never a bother Jim-san.  :thumbsup:

Posted

In my XJ, and possibly in my MJ, if I end up installing a 4.0L/AW4 I am going to adapt to AN fittings on the trans, and either AN or barbs on an aftermarket cooler. 

Just a thought. 

Posted

Jim - I replaced ours with a kit of 4 from Autozone...they were in the 'Help" section (but the sales guy had no clue - I found them on my own). They have two sizes - 1/4 and 3/8.

Posted

Jim - I replaced ours with a kit of 4 from Autozone...they were in the 'Help" section (but the sales guy had no clue - I found them on my own). They have two sizes - 1/4 and 3/8.

As soon as I 'm through here, I'm headed to town. We'll see.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...