dlee Posted March 18, 2012 Share Posted March 18, 2012 Anyone know where I can find a replacement, besides the JY? Shock stud is bent on one of the mounts. Link to comment Share on other sites More sharing options...
Motion Offroad Posted March 18, 2012 Share Posted March 18, 2012 Upper or lower? Link to comment Share on other sites More sharing options...
carnuck Posted March 18, 2012 Share Posted March 18, 2012 When I did SOA rear, I found some swaybar plates from an FSJ that will make repalcement mounts for my MJ (between the spring and axle, which will give a little more lift) Link to comment Share on other sites More sharing options...
dlee Posted March 19, 2012 Author Share Posted March 19, 2012 Looking for the lower shock stud mount. The one that bolts to the leaf spring. I may just end up doing a spring over, but was hoping to stay under 4" in the rear. Link to comment Share on other sites More sharing options...
Blue88Comanche Posted March 20, 2012 Share Posted March 20, 2012 I also need some lower rear shock mounts for Dad's MJ Link to comment Share on other sites More sharing options...
89eliminator Posted March 20, 2012 Share Posted March 20, 2012 i used these... http://www.quadratec.com/products/92000_000.htm Link to comment Share on other sites More sharing options...
dlee Posted March 22, 2012 Author Share Posted March 22, 2012 i used these...http://www.quadratec.com/products/92000_000.htm Yeah, If I end up going spring over, I'll go that route. Link to comment Share on other sites More sharing options...
Motion Offroad Posted March 22, 2012 Share Posted March 22, 2012 Just remember that the factory one's are side specific. Also remember that they are specific to LWB vs SWB (though they will interchange). A SWB left side mount will work on a LWB right side. A LWB left side mount will work on a SWB right side. A LWB left side mount will NOT work on a SWB left side. (you get the point) We also sell some replacement CJ shock plates that'll work on the MJ's. Link to comment Share on other sites More sharing options...
dlee Posted March 23, 2012 Author Share Posted March 23, 2012 Just remember that the factory one's are side specific. Also remember that they are specific to LWB vs SWB (though they will interchange). A SWB left side mount will work on a LWB right side. A LWB left side mount will work on a SWB right side. A LWB left side mount will NOT work on a SWB left side. (you get the point) We also sell some replacement CJ shock plates that'll work on the MJ's. Great! I'll take a look. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now