artimus Posted April 20, 2011 Share Posted April 20, 2011 My brake lights and running lights in back won't turn on or work at all. Ive been trying to figure it out, and can't so i decided to check the fuse, but which fuse is to the brake/dash lights?thanks Link to comment Share on other sites More sharing options...
artimus Posted April 20, 2011 Author Share Posted April 20, 2011 like where is it located on the fuse block? You can't read any of the words on my fuse block. Link to comment Share on other sites More sharing options...
MJRemi Posted April 20, 2011 Share Posted April 20, 2011 http://www.lunghd.com/Tech_Articles/Ele ... cation.htm Link to comment Share on other sites More sharing options...
artimus Posted April 20, 2011 Author Share Posted April 20, 2011 thanks i was looking for something like that on the internet but couldnt find it. do you think it would be the haz/stop fuse? Link to comment Share on other sites More sharing options...
MJRemi Posted April 21, 2011 Share Posted April 21, 2011 Probably, but you said your running lights don't work either. Fuses are cheap. Buy a fuse kit with a tester in it and test every fuse in your panel. Replace as you go and it shouldn't take more than ten minutes. If new fuses doesn't solve the problem then check your bulbs and connectors at the suspect locations. These old connectors can corrode and need replacing sometimes. Link to comment Share on other sites More sharing options...
artimus Posted April 21, 2011 Author Share Posted April 21, 2011 the guy that i bought the comanche from put some sticky stuff in the sockets of the bulbs so they wouldnt wiggle out. The sticky stuff worked but now i have none of that sticky stuff and bulbs keep falling out also. what was that sticky $#!&?? Link to comment Share on other sites More sharing options...
J B Cuz Posted April 21, 2011 Share Posted April 21, 2011 I would bet it is Dielectric (spelling ?) grease. It does 2 things, one it keeps water out of the socket, and two it reduces the vibration of the bulb allowing it to live longer. This stuff has been used in semi trucks for years. You can wipe it out with a cotton tipped swab dipped in alcohol or brake cleaner. The stuff can get pretty solid after a few years. J B Cuz Link to comment Share on other sites More sharing options...
artimus Posted April 22, 2011 Author Share Posted April 22, 2011 well i already got it out but ya the $#!& was like bondo. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now