wannabeMJ Posted January 27, 2011 Share Posted January 27, 2011 I just change my starter relay but forgot to check where the wires were going I know the ground one beacuse it has a clip on it but after that I'm left with 3 3 - Bk/Wh 1 - Gn 2 - Or w/fuse link not sure I got them in the right place can anyone input on this plz like that Ty Dom Link to comment Share on other sites More sharing options...
wannabeMJ Posted January 28, 2011 Author Share Posted January 28, 2011 found something on the net it says 1 orange 2 green 3 black can anyone pop their hood and confirm this? Link to comment Share on other sites More sharing options...
fiatslug87 Posted January 28, 2011 Share Posted January 28, 2011 Here's the '88 Electrical Manual http://www.comancheclub.com/forums/viewtopic.php?f=9&t=12734&hilit=electrical+manual And this is my '89 4.0L Automatic, I labeled it according to the '90 FSM. I think you got one right, the center green one to the Solenoid. Orange goes to Ballast Resistor. Black/White to Ignition. Green from the black/white bundle to Ground. Link to comment Share on other sites More sharing options...
wannabeMJ Posted January 28, 2011 Author Share Posted January 28, 2011 Ty very much Fiatslug thats all I needed to complete this Link to comment Share on other sites More sharing options...
wannabeMJ Posted January 29, 2011 Author Share Posted January 29, 2011 I've changed: the starter the selenoid the realy the wires the ignition switch before that and still no start any suggestions I'm kinda lost here Link to comment Share on other sites More sharing options...
maddzz1 Posted January 29, 2011 Share Posted January 29, 2011 Is it turning over but not starting? or is it not doing anything when you turn thr key Link to comment Share on other sites More sharing options...
wannabeMJ Posted January 29, 2011 Author Share Posted January 29, 2011 the fuel pump goes then there is a clic (wich I assume is the relay) but nothing after that no starter no turning over Link to comment Share on other sites More sharing options...
maddzz1 Posted January 29, 2011 Share Posted January 29, 2011 Maybe check the fusible links by the solenoid. Give them a tug. Sometimes they look fine but will stretch like taffy when pulled. Link to comment Share on other sites More sharing options...
wannabeMJ Posted January 29, 2011 Author Share Posted January 29, 2011 no more fuse link there I've replace that with a solid wire Link to comment Share on other sites More sharing options...
wannabeMJ Posted January 30, 2011 Author Share Posted January 30, 2011 could I've fried the relay or the cpu in the process? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now