Bigbike Posted December 3, 2010 Share Posted December 3, 2010 I know its probably been cover 100 times but to do bucket seats would I just have to get seats from an 84-94 XJ??? Perferably 2 door seats. Is there anything else that will bolt in? I also have a 97+ center console that I will be putting in. Any tips on that too? Link to comment Share on other sites More sharing options...
utah_redneck Posted December 3, 2010 Share Posted December 3, 2010 You can make any bucket seat fit if you have time and money. But to use factory XJ seats they "should" bolt right in using there donor mount brackets. I'm lucky, my MJ came with buckets...not very good ones, they are low back and vinyl covered. i too will be getting newer XJ buckets ('96). As far as the console, I used one from a '96 XJ and just remeber to get the mounts with it. But I'm also going to convert my e-brake to the XJ hand pull set-up. Link to comment Share on other sites More sharing options...
Bigbike Posted December 3, 2010 Author Share Posted December 3, 2010 So yeah, pre 95 XJ seats bolt in??? Link to comment Share on other sites More sharing options...
mkbruin Posted December 3, 2010 Share Posted December 3, 2010 They bolt up to the MJ bases. You still have to cut the welds and rivets to swap bases. Link to comment Share on other sites More sharing options...
Bigbike Posted December 3, 2010 Author Share Posted December 3, 2010 Does some one have a write up? Link to comment Share on other sites More sharing options...
mkbruin Posted December 3, 2010 Share Posted December 3, 2010 There are several on here. Search the DIY section. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now