MjPioneer Posted October 16, 2010 Share Posted October 16, 2010 Are there any good write ups to installing a Ax5? I need to replace mine and I can't find much information on the process. Link to comment Share on other sites More sharing options...
Pete M Posted October 16, 2010 Share Posted October 16, 2010 be careful with the crossmember bolts. spray them with PB Blaster or the like for a few days before attempting to undo them. they like to snap right off. :( Link to comment Share on other sites More sharing options...
Geonovast Posted October 16, 2010 Share Posted October 16, 2010 Go get yourself a left handed drill bit and an easy out before you start. I have only pulled one crossmember off without losing at least 2 bolts, and if you only have 2 per side, that's a problem. Link to comment Share on other sites More sharing options...
MjPioneer Posted October 16, 2010 Author Share Posted October 16, 2010 Cross members already free :thumbsup: Took care of that step the day i got her in my first run in with this tranny. Link to comment Share on other sites More sharing options...
Pete M Posted October 16, 2010 Share Posted October 16, 2010 do you have a Chiltons or Haynes manual? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now