green_miner Posted July 29, 2010 Share Posted July 29, 2010 So i lost the little spacer that goes in between the slave cyclender and the tranny. no one local to me has one. does anyone have one or know where i can get one Link to comment Share on other sites More sharing options...
green_miner Posted August 1, 2010 Author Share Posted August 1, 2010 Does anyone know the dimentions of the spacer? or anything at all? Link to comment Share on other sites More sharing options...
JeepcoMJ Posted August 2, 2010 Share Posted August 2, 2010 4 cyl or 2.8 v6? there is no spacer for a 4.0, and I'm guessing you didn't switch yours to external. Link to comment Share on other sites More sharing options...
green_miner Posted September 5, 2010 Author Share Posted September 5, 2010 its a 2.5 gas with a external slave cylinder on the manual transmission. it needs a spacer that i can't find anywhere so any help would be appriciated Link to comment Share on other sites More sharing options...
MrFreeze5 Posted September 5, 2010 Share Posted September 5, 2010 Have you tried a dealer? Or one of the larger online retailers with lots of OEM parts like Quadratec or 4WD Hardware? Link to comment Share on other sites More sharing options...
Geonovast Posted September 5, 2010 Share Posted September 5, 2010 Mine measures at 1 9/16" That's with a tape measure measuring with it in the truck, I'm sure a mic would be more specific. Link to comment Share on other sites More sharing options...
carnuck Posted September 7, 2010 Share Posted September 7, 2010 Did you find one? Link to comment Share on other sites More sharing options...
JeepcoMJ Posted September 7, 2010 Share Posted September 7, 2010 it's much thicker than 9/16". Link to comment Share on other sites More sharing options...
Geonovast Posted September 7, 2010 Share Posted September 7, 2010 it's much thicker than 9/16". Mine measures at 1 9/16" That's with a tape measure measuring with it in the truck, I'm sure a mic would be more specific. Link to comment Share on other sites More sharing options...
JeepcoMJ Posted September 7, 2010 Share Posted September 7, 2010 i can't read lol. Link to comment Share on other sites More sharing options...
green_miner Posted September 9, 2010 Author Share Posted September 9, 2010 thanks guys. i droped the slave cyclender at the machine shop for the overall shape and gave him the dimention. now i just gotta wait til the guy has free time so that i get it done at no cost. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now