jeephack Posted March 13, 2010 Share Posted March 13, 2010 Can someone enlighten me as to what this connector goes to? It is located behind the driver's side kick panel. I'm swapping out the dashboard harness and fuse block from an XJ, and after getting the harness all nice and neatly attached to the dash, I find that there is no female end on the XJ harness for this connector. :doh: Image Not Found Link to comment Share on other sites More sharing options...
1987Comanche Posted March 13, 2010 Share Posted March 13, 2010 Windshield wiper and turn signal control. The mating connector would be on the steering column. Link to comment Share on other sites More sharing options...
jeephack Posted March 13, 2010 Author Share Posted March 13, 2010 So, apparently a '90 XJ harness and a '87 MJ harness are not totally interchangeable. Link to comment Share on other sites More sharing options...
Backroads Posted March 13, 2010 Share Posted March 13, 2010 I've found other minor compatibility issues between 86/87 era MJ's to 88+. So its quite possible there are differences in the harnesses. Link to comment Share on other sites More sharing options...
Pete M Posted March 14, 2010 Share Posted March 14, 2010 Do you have a "macro" setting on your camera? Link to comment Share on other sites More sharing options...
jeephack Posted March 14, 2010 Author Share Posted March 14, 2010 :dunno: I'm an old phart. Still trying to figure out where the film goes. I did stumble across a wonderful implement called "search" this afternoon, and found a write-up by mfpdm that was exactly what I was looking for. I should be able to take the information gleaned from that write-up and make things work. Thanks, Jeephack Link to comment Share on other sites More sharing options...
Pete M Posted March 14, 2010 Share Posted March 14, 2010 There should be a button on the camera that turns on the "macro" (commonly accompanied by a little image of a flower), which essentially means: focus on stuff that's close to the camera. Why they can't just say "close up" is beyond me. :dunno: My little Canon has one step further called the "magnifying glass" setting and will focus on things right up the the camera lens. :D Link to comment Share on other sites More sharing options...
mfpdm Posted March 14, 2010 Share Posted March 14, 2010 That's the afterbody connector for the fuel pump and tail lights. If you swapped in a XJ harness you will need to spice both of the afterbody connectors into the XJ dash harness. Here is a write up in the DIY section that will help you out. viewtopic.php?f=9&t=19695 :cheers: Link to comment Share on other sites More sharing options...
jeephack Posted March 26, 2010 Author Share Posted March 26, 2010 That's the afterbody connector for the fuel pump and tail lights. If you swapped in a XJ harness you will need to spice both of the afterbody connectors into the XJ dash harness. Here is a write up in the DIY section that will help you out. http://comancheclub.com/forums/viewtopi ... =9&t=19695 :cheers: A most excellent writeup, and the photos were priceless. Everything is back together now, and everything works but the clock. I can live with that. Many thanks mfpdm!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now