manual transmission floor boot/seal

[azscott]

Does anyone know the proper term or..where to get the floor seal for a 5 speed transmission. This is NOT the rubber boot that fits ON the center console but rather the inner one that actually screws to the floor/center hump and keeps the floor sealed. Mine is dry rotted and I get a nasty tranny fluid odor when I open the windows as the seal is shot and air is coming up from the hole in the floor for the shifter.

scott

[knever3]

This is the one you need. I ordered one a few months ago and it worked great and exact replacement. They may have lowered the price because I remember paying $25 for mine. This one is only $7 plus shipping. I glued mine down with polyurathane calk you can get at Home Depot.

 

 

http://www.quadratec.com/products/52110_01.htm

 

Hope this helps.

[garyindiane]

Does this work with the pukegoat? I just found out mine was destroyed yesterday.

 

Thanks in advance...

-gary

[azscott]

..well mine is a Pukegoat so we will see...I did not order the one pictured above but another one from the same catalog as it looked to be a better fit.

[knever3]

Yes it does, that's what I have. The ax-15 and the ba-10's floor shift stalk is the same so this will work.