88elimnator Posted October 9, 2009 Share Posted October 9, 2009 does an 88 comanche need new front upper control arms with a 4 1/2 IN lift running 33s? does anyone know. thanks Quote Link to comment Share on other sites More sharing options...
CWLONGSHOT Posted October 9, 2009 Share Posted October 9, 2009 WO/ drop brackets its prefered to run all replacement control arms on any lift over 3.5-4". W/ Drop brackets you can get away with it but you willl still be better off with replacement arms. CW Quote Link to comment Share on other sites More sharing options...
88elimnator Posted October 9, 2009 Author Share Posted October 9, 2009 I already have adjustable lowers, and took the 2 1/2 spacers out in attempt to make the upper stock arms work but they don't seem to be long enough still. Quote Link to comment Share on other sites More sharing options...
cracker Posted October 9, 2009 Share Posted October 9, 2009 The UCAs are pretty 'light duty' and should be replaced regardless plus they are 21 years old ;) Quote Link to comment Share on other sites More sharing options...
mnkyboy Posted October 10, 2009 Share Posted October 10, 2009 I have a 5" lift with stock uppers and lowers,truck drives fine. so no you don't need them although they would be good to have. you should be able to get what you have to work Quote Link to comment Share on other sites More sharing options...
88elimnator Posted October 10, 2009 Author Share Posted October 10, 2009 i can not get the springs to straighten up there bowen back at the top and forward on the bottom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.