D30 Axle shaft bearing?

[jeepthing07]

anyone know the part number for the bearing inside the passengers side axle shaft on the Dana 30 with vacume disconnect? i can't find it anywhere i don't know if I'm looking in the wrong places or what 4wd hardware don't list it. quadratec don't list it. its the bearing thats in between the 2 shafts on the disconect side in the outter shaft. i posted this earlier but then i thought i found the bearing but it was the wrong one so I'm reposting it.

[pingpong]

There is no bearing in between the one holding the carrier and the unit bearing. There is a seal in there, but no bearing

[Bounty Hunter]

That's what I had thought, seal only on the disconnect.

[jeepthing07]

I took a pic the bearing is inside the end of the outter shaft on the disconnect side. the cage is busted and about 5 rollers fell out.

 

Image Not Found

[Pete M]

Sounds like a great opportunity to go to a solid shaft and 297s. :brows:

[jeepthing07]

after spending all weekend looking on the net i finely found it its a INA bearing part number SCE108. Timken and BCA bearings share the same part number its a $4 bearing :D