xjman4 Posted June 18, 2009 Share Posted June 18, 2009 how should i flat tow a mj with manual tranny and four wheel drive? Link to comment Share on other sites More sharing options...
Wildman Posted June 18, 2009 Share Posted June 18, 2009 Transfer case in Neutral. Tranny in 1st gear. (with the drive shafts attached) Link to comment Share on other sites More sharing options...
JeepcoMJ Posted June 18, 2009 Share Posted June 18, 2009 mind you, that's flat tow. towing on a dolly is different. if it's 4wd the t-case does lock front to rear in the neutral position so it's best to remove the rear driveshaft. Link to comment Share on other sites More sharing options...
Wildman Posted June 18, 2009 Share Posted June 18, 2009 mind you, that's flat tow. towing on a dolly is different. if it's 4wd the t-case does lock front to rear in the neutral position so it's best to remove the rear driveshaft. That's what the OP asked..........For Flat Towing. That's what my reply was.......For Flat Towing. Wheres the tow dolly come in :dunno: Link to comment Share on other sites More sharing options...
Pete M Posted June 18, 2009 Share Posted June 18, 2009 I think he's just adding that in so that anyone reading this would know there's a difference. :dunno: I find I do that a lot, adding in near-random bits of info for future possible readers. :D Link to comment Share on other sites More sharing options...
HOrnbrod Posted June 18, 2009 Share Posted June 18, 2009 Pete, you have your hands full doing damage control. :D The esteemed Wildman answered the question perfectly as usual w/o clouding the issue. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now