mjdoa Posted April 14, 2009 Share Posted April 14, 2009 Some where,on some forum ,I saw a picture a guy had drawn and posted of the mounting holes in the rear brackets where they mount to the frame. I'll be dipped if I can find it. Has anyone else run across it? I'm finally getting around to doing my rear bumper, and the old one and brackets are long gone. need dimensions to drill new brackets I'm building. I'll keep sirching. Thanks Link to comment Share on other sites More sharing options...
Wildman Posted April 15, 2009 Share Posted April 15, 2009 Here found this for you = viewtopic.php?f=2&t=13613&hilit=rear+bumper+brackets 2nd post down has the template. Link to comment Share on other sites More sharing options...
mjdoa Posted April 15, 2009 Author Share Posted April 15, 2009 Thankyou,Wildman,you are the shizz. :clapping: I've been hunting that for 2 days. Was about to try and cut a clear plastic sheet I could hold up there and mark the spots. Link to comment Share on other sites More sharing options...
mjdoa Posted April 15, 2009 Author Share Posted April 15, 2009 Except,on second look,those are front brackets,not rear. And that is the drawing I remember. I'll go back to that site,see if anyone's posted up the rear dimensions. If not,I'll make a template and post up the measurements in case any of you all ever need them. Link to comment Share on other sites More sharing options...
LEAD_NOT_FOLLOW Posted April 15, 2009 Share Posted April 15, 2009 Those are the front's and we do not have the rears on our website. Link to comment Share on other sites More sharing options...
mjdoa Posted April 15, 2009 Author Share Posted April 15, 2009 Nor does any other website it seems. I can't draw like that guy did but we'll have the specs on our website shortly,as long as you guys promise not to laugh at my artwork. :no: Link to comment Share on other sites More sharing options...
Wildman Posted April 16, 2009 Share Posted April 16, 2009 Oh........me wrong then :doh: I looked at it really quick, and though it was for the rear mounts :oops: I have some rear bumper mounts in the shop, if you need to trace the frame, it would be easier to trace the brackets, that are loose and sitting on the shelf :roll: Let me know, and I'll do this for you........to make up for my mistake :oops: I can make a tracing of the brackets and send you the paper tracings, drop me you addie via a PM and I'll get it out in a day or two. Link to comment Share on other sites More sharing options...
MrSimon Posted April 16, 2009 Share Posted April 16, 2009 I have a brand new JCR rear bumper sitting un-installed in my garage. Would it help if I took pics and measurements of their mounting brackets for you? Link to comment Share on other sites More sharing options...
mjdoa Posted April 16, 2009 Author Share Posted April 16, 2009 Nope,thanks for the offers,I made cardboard tempplates and it worked out fine. When I get it finished I'll post up the specs. As always,thanks everybody. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now