power steering hose

[pug]

I have a 1990 2.5 . The power steering hose was leaking so i tride to tighten. I broke it know big deal until i took some kind of sensor of the power steering. It broke so do i need to replace this sensor or can i bypass sorry i do not have pictures

[JeepcoMJ]

I have a 1990 2.5 . The power steering hose was leaking so i tride to tighten. I broke it know big deal until i took some kind of sensor of the power steering. It broke so do i need to replace this sensor or can i bypass sorry i do not have pictures

 

just ignore the sensor...it has no real function.

[HOrnbrod]

The PS pressure sensor's function is to increase the RPMs of the engine slightly when your in the stops of the steering gear. Found only on the anemic 2.5L. :D If your engine doesn't stall out when doing hard turns, forget about it.

[garmj]

I am in process of replaceing the Exhaust manifold along with the high pressure PS hose and I saw the connector just hanging there and nothing to connect to.I have no stalling issues but now I know what the connector goes to.

[garmj]

Finally got the hose replaced today. The old one didnt have a place for a switch but the replacement has a 1/8" pipe plug hole in it for a switch, it also came with a pipe plug to cap it off if not needed. :D