james750 Posted March 29, 2009 Share Posted March 29, 2009 Now that I finished the SOA on my truck it is time to fix some of the unforeseen issues. First one I am going to tackle is the fact that the e brake cables are too short to reach the bed side mount where the two cables meet the actuator and the front cable connects. I', sure that I am not the first person to have a problem with this. What did you other guys do about it. The other problem I have is that my extended SS rear line is still too short! anyone know where I can get an even longer extension rear brake line that will bolt up? Thanks, -James Link to comment Share on other sites More sharing options...
ren Posted March 29, 2009 Share Posted March 29, 2009 Look in to the brake hose from mid-90s' Dodge van. It is stupid long, and the connections are right. Link to comment Share on other sites More sharing options...
jpdriver1 Posted March 30, 2009 Share Posted March 30, 2009 rockauto.com has cables for short & long beds Link to comment Share on other sites More sharing options...
james750 Posted March 30, 2009 Author Share Posted March 30, 2009 rockauto.com has cables for short & long beds Problem I am facing is that my long bed cables are too short to reach with the massive lift I got out of my SOA. Link to comment Share on other sites More sharing options...
dasbulliwagen Posted March 30, 2009 Share Posted March 30, 2009 I'm not sure how the clearance is to the rear driveshaft, but maybe you could make a dropdown or spacer for the rear ebrake splitter, that should give you some extra cable room. I'm not sure what evryone else has done, but Id be curious to find out as an SOA will be in my future. Good luck! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now