BPB Posted October 21, 2008 Posted October 21, 2008 I really think that an ho header will bolt right up to my renix I think that the only difference is the angle of the down pipe. I have a ho header, and a cracked renix manifold. I also have the ho down pipe. How can i test this with out taking my jeep all apart? If I took it into my local auto parts store and test fit a gasket from a renix and all the holes lined up, would that mean that it will work? I know that it will bolt on.
offroader461 Posted October 22, 2008 Posted October 22, 2008 it will bolt up but the ports don't line up correctly so unless your putting on the HO head it would be pointless
BPB Posted October 22, 2008 Author Posted October 22, 2008 The ports do line up! I went to the local auto parts store and sized it up with a renix manifold gasket. it was an exact match. The only only hurdles that I have to over come now is that the o2 sensor goes on the down pipe, wich is cool because i grabbed the HO down pipe, and I have to figure out how to re-work the EGR system because there is no hose going to the manifold now. any ideas?
FxRacing282 Posted October 23, 2008 Posted October 23, 2008 Block off the EGR at the intake & run it. not emissions legal. just drill and tap and plump in the egr like a stock unit.
PIKE Posted October 23, 2008 Posted October 23, 2008 Block off the EGR at the intake & run it. X 2 :agree: I live in Washington too and pass emission no problem. :cheers:
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now