Jump to content

Recommended Posts

Posted

Just installed a new one from Advanced........... and lets just say it was about a foot longer then the oem... :roll:

My trucks a 2wd would it be a better fit if the truck was 4wd?

Posted
Probably about 10" +/- ...
not that it was a big,big problem I just had to push the cable past the spot where it goes in the trans. I just hope it doesn't bind from the extra large 90* bend....
Posted

Hey Jt, quick question. Was the one you bought from Advance the correct width, because the one I got from Autozone was too skinny and too long?

And actually, Taz do you guys sell one still with the housing because mine is now jacked?

Posted
Hey Jt, quick question. Was the one you bought from Advance the correct width, because the one I got from Autozone was too skinny and too long?

And actually, Taz do you guys sell one still with the housing because mine is now jacked?

 

Not sure I understand what your asking about width. Like the outside diameter of the black plastic sleeving or the inside spring ends?? My new cable seemed like it had a slightly larger OD. The ends, not sure, my old cable didnt have any.

 

I don't know if I was suppose to do this, but I used some synthetic grease to coat the "springy" inside cable then put it in the plastic "tube" all lubed. I hope I don't run into problems later because of that, but the cable wasnt very much $$, so if it self destructs Ill just go through Brent for a REAL replacement....

Posted

It should be complete as I have never seen our cables come as just the inner part. Let me take a look and see if I can find a dealer with one and get them to look at it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...