Jump to content

help with light grounds


Recommended Posts

ok so I'm putting the interior back in the truck tried the lights before the gauges were in the lights worked that i had hooked up (just the front lights and a few interior lights) then i put the gauges in and connected up the rear lights and now i have no lights. i checked to make sure that i have power to every thing and i do but i have no grounds the ground is connected in the back on the bed but still no lights and it seems to be on the corner lights that i have power to both sides of the connector

 

has any one have this problem before and please help!!!

 

Thanks lower jeep

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...