MCF90

I'm just curious if the coils I have are stock or aftermarket. Pretty sure they're stock, but just want to make sure. Matt

Looking for the free, uninstalled length. Matt

Just curious, how long are the stock front coils on the Comanche? Matt

Just like the title says, I'm looking for a front (radiator) skid plate for my Comanche. Thanks! Matt

Cool, thanks Jim! You wouldn't have dimensions would you? Thanks! Matt

Ok, good deal. I've read that its a good idea to steer clear of Fram filters, any reason for this? Matt

Gonna need to change the oil in the Comanche soon and was just curious if anyone uses the Bosch oil filters. Thanks! Matt

Hey all, Just curious if anyone has any pictures and/or dimensions of the factory roll bar frame tie ins. I have the original brackets for the downtubes that I can use as templates to remake them as they are pretty rusted, but not the frame tie ins. Any help is appreciated. Thanks! Matt

Lostant Illinois here. About 10 minutes south of 80 on Illinois 39/51. Matt

I"m 6'4" and am pretty comfy in my Comanche with XJ buckets. Matt

I"ll drop him a line. Thanks! Matt

Hey all, Just curious if anyone knows of anybody reproducing decals for a '90 Eliminator. I need the "fade" graphics and stripes that go on the lower portion of the body. Thanks! Matt

Nope, still need to get it to an alignment shop, just haven't had a ton of time lately. Matt

Turns out it was just a blown fuse. Guess I was looking at the wrong one......doh!! Thanks guys! Matt

Hey all, Just like the title says, I don't have any bake lights on my Comanche! I checked the fuse, and its good. All of my other lights work though. Any ideas? Could it be a bad switch? Matt

Found a center console, but I am still looking for a set of tail lights and skid plates. Matt

North Carolina I believe. Matt

Which pick N pull where you at? Was it the LKQ in Rockford? Matt

Hey all, Just like the title says, I'm looking for tail lights and skid plates for a shortbed. Also looking for a gray center console as the one I have now is pretty thrashed. Thanks guys! Matt

Any recomendations as to brand of ball joints to use/where to get them? Thanks guys! Matt

HA! No, no jumping, lol. Matt

Hey guys, Just a quick question, I noticed the driver's side front camber is off a bit (bottom of the wheels is kicked out farther than the top) as compared to the passenger side. I checked the hub, it seems to be in good shape. Is this as simple as taking it to a shop and having it aligned? Thanks guys! Matt

Anyone?? :dunno: Matt

I had a 2003 Ranger FX4 Level II. Loved that truck. Did well off road, comfortable on road ride, plenty of power. Never had a problem with it. My dad had a 96 Ranger and the motor for the 4 wheel drive crapped out twice. Matt

You sure about that? Or a 231? The only Jeep with a 241 that might swap in is out of a TJ Wrangler Rubicon. Other 241s were in full size trucks like my 94 Suburban. Oops, yeah, that's what I meant.