wannabeMJ

thanks as I looked at the pix you posted up of the ax-5 I can see where the bolt is for the stick on top it is the same as mine so perfect

so will it be an AX-15 under the cherokee?

thanks Pete :cheers: Ill cut that of tommorow it'll make my job easyer to only put 1 piece of flooring instead of 2 :bowdown:

what's gonna be the differences betwen the ax-5 and the ax-15 cuz the one under the cherokee looks alot like it

well the passenger side is all done and awaiting for paint tommorow here is a final look I also repaired a small part on it because as I grinded and sanded it started to makes holes I don't have pics of when I welded the piece but its all good and the white stuff is seam sealer Image Not Found

is that gonna affect structure ??

here it is I have this trany that I took out of the comanche with the 2.8L but it looks alot like an AX-15 but It was supposed to be the BA??? anyway I'm not quite sure but if so Ill keep it instead and looks like I got the same one on the donnor (cherokee 90) Image Not Found

Here it is is anyone have any ideas how to fix that cuz if I keep grinding Ill go trough that is the support for the driver side Image Not Found

wire brush on a angle grinder and a degreaser witha lot of elbow grease I was lucky the rear frame had no rust on it unlike the the cab :wall:

X2 I just bought a 4.5'' kit with a full leafs pack for dirt cheap with 10% discount because CC member get that give tom a call great guy to talk to and I also learned that mississipi doesn't pay taxes over internet buy and the CAD is pretty much even with the USD (from canada) I don't know where u from but give him a call can't lose anything but you WILL lose money buying RUSTY'S

does he stop hitting balls as you take parts from the truck ???????? :nuts:

I started on the floor pan today iknew it was rusted but not that bad I started to grind and cut the floors here is a couple of shots of what it looks like now PS Image Not Found REAR PS Image Not Found front PS Image Not Found tranny hump Image Not Found I still have to finish tommorow before I can start to weld I'm glad I won't have to do the PS I will give it a good sanding to after I'm done with the angle grinder (god I love working with that tool) then Ill start cutting the pieces do you guys have any ideas for the support beam it seams pretty bad :dunno:

What? A friend and I picked up one of my shortbeds, and while we could lift it, it was a pain, hard to control, and there is no way it only weighed 125 lbs. A longbed is gonna be a bit more than a shortbed too. I would get at least 4 guys, to make sure you can control it enough to not jam it against something, or end up dropping it. maybe you need to build muscle lolllllllllll :rotfl2: just kidding maybe I'm wrong about the weight but me and my buddy liftted it no probs maybe its because were both military guys

yeah I took everything out to fix and repaint the truck I'm also putting a 4.0L instead of the old 2.8L so Ill be changing the rad (will take the cross member from the donnor)

yeah 2 guys will be ok to lift its a bit awkeward to lift in a small garage but it weights about 125 pounds

thankx for the answer CW

yeah but I willnot POR15 the whole truck :no: would be good but would not look that good :yes:

thanks it was a YJ but as the Cj front I like round head lights I think Ill paint them to anyway just to preserve them tommorow I'm attaking the cab floor

I've read the whole project And I have a question (same as the first one I sent you) you've replace the rear shocks on a angle bar that you've put underneath the bed but as you fixed the rear frame I saw that you had the original shocks still attached to the frame did you just add new shocks on top of the original ?

Did some of you guys put something on the inside fenders I'm tempted to paint them to they got no rust but don't wanna leave a chance for rust to start again thanks all by the way comments are appreciated :popcorn:

making good use of the beautifull sunny day I finished painted the rear frame so this part is gonna be donne looks good I will probably attack the cab this afternoon and start taking care of the rusted floor see how much work its gonna take

over the phone yeah they do comanche 86 to 92 front coil and rear leafs kit number RC-626S actually if you wanna order give a call to tom is a great guy and if you have any question hell answer them right away

much likely to do so

haven't made progress on the truck for the last few days but today I just bought a 4.5'' lift from hell creek for a very decent price and on top of that Tom is a very nice guy to deal with and I also love the exchange rate 1.02 us to cad can't wait to see it it will be here in a week or so

well its done in a week ill be the proud owner of a 4.5'' lift kit from hell creek can't wait to put it on the truck