tmanhollister

Looking good!

Image Not FoundImage Not Found How she's sitting today. Working on making her more street friendly for the time being. Thinking about doing a real paint job on her too. Steering system with the flip kits should be next on the list besides installing the passenger corbeau seat. Also looking into the wj vacuum booster/mc and sway bar swap. All my buddy's are going to lose their red sticker riding season soon, so it will be back to working on the jeep.

Looks just like my mj. I painted mine desert tan beginning of October past year. I like the 2-tone look.

damm i wish i had a 5.3 swap!

i like it! can you put up some pics of how your front end is set up?

picked up some corbeau gt7's. carpet is almost finished, seats after that, then speakers and a new deck. can't wait to get this thing out there Image Not Found

got the floor lined with undercoating. hosed off the carpet and realized its not in that bad of shape.. just needs a good cleaning. will be putting this up for sale (I bought black carpet already). also, sprayed some duplicolor rubberized undercoating on my center consol because it wasnt in good shape, came out GREAT in my opinion. might finish off the rest of my interior panels with this, going to see the durability of it first. here's some pics. Image Not Found Image Not Found Image Not Found Image Not Found

Jenssen: that's definitely the way to go, but I'm short on fabbing skills and will most likely check out the fitment of corbeaus bracket first. Hornbrod: thanks for the link, that didn't show up on my search.

i did this on my zj when i broke my rear pinion yoke. i put a latex glove over the transfer case output and duct taped it(after cleaning housing) and it held up great. i drove a total of about 10 miles with no issues.

http://www.filthymotorsports.com/Corbeau_Baja_Ultra_SS_p/corb-ultrass.htm been thinking of buying a set of these instead of getting the original buckets recovered. Anyone have experience with these and/or seat brackets?

Thanks, and yeah, I will Probably do it today actually. I was throwing around the idea to keep it since I will be getting a bumper that will be right next to it, but yeah, I think I'm going to cut it.

Image Not Found New carpet, bedline floors, speakers, recovered seats... Coming soon.

Took her out today. First time on the 36's and 488s. Everything worked pretty well. Definitely need to upgrade the steering as I can see that puny tierod bending pretty easily. Here's some pictures. Image Not Found Image Not Found Image Not Found Image Not Found

:popcorn:

thanks for the clarification.

I need to do this soon, so i want to get this right. this is concerning the 96 cherokee swap, not concerning the zj-wj swap as it seems the xj swap is much easier with similar results. this will be on my 91 mj. I can get a booster/mc set up from a 96 cherokee, and it will bolt right in, no modification? *are the mc output holes on the correct side, or will new lines need to be made? *has anyone blown out their load sensing valve by adding the extra pressure or had issues with the rears locking up even with the valve,(where should the valve be set for correct operation) I will be buying new parts, which through vatozone is going to come to ~120. not bad for a preventative measure replacement/big upgrade.

Doin work! Looks good.

Thanks guys. Yeah it's definitely a different look for the mj.

Got some work done. Motor mounts in, new tranny fluid, paint, d30'abs model with 4.88s, raised sway bar mounts, LCD skids...little stuff here and there. Putting off the full widths for a different rig. Let me know what you think! Image Not Found Image Not Found Now with some 36" tsl's. Image Not Found

I haven't really beat on them, but they are pretty thick and I would think they could hold up well.

picked up a set of axles out of a 79 bronco. hp44 30 spline and 9' 31 spline 65-67 wms. going to be using the raduis arms converted to johnny joints at the ends. cleaning them up this weekend and figuring out what need to be done.

did the first diff fliud change and threw on a ruffstuff diff cover. that thing is thick! also waiting for some brown dog motor mounts to come in, they were back ordered 10 days. paint and pics coming soon

looking good! did pretty much everything i wanted to do to it! ha. how are those motor mounts holding up? i just ordered a set for my new one.

got some tube doors mounted up. still havent geared the d30 yet. ordering browndog mm's soon. Image Not Found Image Not Found Image Not Found

new front clip. 130 shipped. Image Not Found got this done. Image Not Found Image Not Found Image Not Found paint coming soon