Wakerider933

mounted and wired a new cb and hooked up the speedo

thanks not what i expected but its still cool

thought is it was interesting i saw it on http://www.ballisticfabrication.com/ its in the slide show in the top right corner I'm just trying to figure out the make and model

my dash lights quit working and i know the issue is in the dash should i wait to just get a new dash with a tach and not waste my time with the light issue?

tear it apart you should be able to see the problem right away, if its a NP231 i know those are extremely simple and parts are easy to get

mine also was leaking through the door seal some of it was missing and caused alot of cold air to enter the cab

thanks eagle for all the help

now that i have removed the height sensing valve what flex line should i use with a 4 inch lift?

i would like to put a sub or subs in mine, could you take pictures of how your box is setup?

Eagle, what do you suggest in place of the stock valve? cap the return line at the front block and run the feed line to a T?

thanks guys i would love to have a factory service manual but i need to put my money into parts first thanks alot

i havent been able to find anywhere that can tell me

thanks man i found that the line from the clutch mater cylinder had a small leak in the line that goes to the tranny but and was putting out enough pressure. but i wasnt low on fluid at all which is why i assumed i must have been the clutch. seems like your in a great situation, good luck with her.

i used a cover for an f150, if its bigger you can just cut down the frame and have some one make the cover fit. cost me $30 to get the cover done and i got the rest for free

what clutch will give me the best bang for my buck? i have a 89 with the ax-5. where can i get synchros while i have it out?